EUVIMEDEUVIMED entdecken
Crossref

Amplitude modulation of acoustic oscillations inside an acoustic resonator via the thermoacoustic effect: An experimental study

Lihui Gu, Yuzhi Fan, Zhaoyu Li, Ercang Luo, Rui Guo, Geng Chen

Journal of Applied Physics · 07.07.2026 · 140 (1)

DOI: 10.1063/5.0332653 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Physics, online erschienen am 01.07.2026. Verfasst von Lihui Gu und 5 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Gefördert von: Key Research Program of the State Key Laboratory of Cryogenic Science and Technology, National Natural Science Foundation of China, Natural Science Foundation of Jiangsu Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Acoustic energy harvesting has attracted considerable attention due to its promising applications in low-power sensors, self-powered monitoring systems, and Internet of Things (IoT) nodes. In this study, the thermoacoustic effect is leveraged to modulate the amplitude of acoustic oscillations within a standing-wave acoustic resonator, providing a novel strategy for enhancing the performance of acoustic energy harvesters beyond conventional approaches. First, an experimental prototype of the acoustic resonator driven by an external loudspeaker was designed and constructed, and its forced response was systematically characterized. Subsequently, the dynamic behavior of the loudspeaker-driven acoustic resonator integrated with an inhomogeneously heated thermoacoustic stack was investigated, with particular emphasis on the effects of driving frequency and voltage. The results show that, as the temperature difference across the thermoacoustic stack increases, acoustic oscillations inside the loudspeaker-driven acoustic resonator can be either amplified or suppressed. Distinct frequency bands are identified in which amplification and suppression of acoustic oscillations take place. Specifically, amplification occurs within the range of 70–130 Hz, whereas suppression is observed over 40–70 and 130–250 Hz. In addition, an optimal driving voltage of 5.5 V is observed, at which the modulation effect becomes most pronounced, yielding a maximum pressure ratio of 1.48 and a minimum pressure ratio of 0.81. The amplitude modulation strategy proposed in this study not only expands the application scenarios of thermoacoustic technology but also offers valuable guidance for the optimization and performance enhancement of acoustic energy harvesting systems.

Förderung

  • Key Research Program of the State Key Laboratory of Cryogenic Science and Technology
  • National Natural Science Foundation of China
  • Natural Science Foundation of Jiangsu Province
  • Science and Technology R&D Program of China Railway Group Limited
  • Zhishan Young Scholar Program of Southeast University
  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Gu, L., Fan, Y., Li, Z., Luo, E., Guo, R., & Chen, G. (2026). Amplitude modulation of acoustic oscillations inside an acoustic resonator via the thermoacoustic effect: An experimental study. Journal of Applied Physics, 140(1). https://doi.org/10.1063/5.0332653

Vancouver

Gu L, Fan Y, Li Z, Luo E, Guo R, Chen G. Amplitude modulation of acoustic oscillations inside an acoustic resonator via the thermoacoustic effect: An experimental study. Journal of Applied Physics. 2026;140(1). doi:10.1063/5.0332653

BibTeX
@article{Gu2026,
  author = {Gu, Lihui and Fan, Yuzhi and Li, Zhaoyu and Luo, Ercang and Guo, Rui and Chen, Geng},
  title = {Amplitude modulation of acoustic oscillations inside an acoustic resonator via the thermoacoustic effect: An experimental study},
  journal = {Journal of Applied Physics},
  year = {2026},
  volume = {140},
  number = {1},
  doi = {10.1063/5.0332653}
}
Kostenlos starten →