EUVIMEDEUVIMED entdecken
Crossref

Mechanism of dynamic stall delay via leading edge vortex control by steady and pulsed plasma actuation

C. P. AbdulGafoor, B. B. Raghuram, Krishma Rajesh Mehta, Aniruth Arun, Nagabhushana Rao Vadlamani

Physics of Fluids · 01.07.2026 · 38 (7)

DOI: 10.1063/5.0331912 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Physics of Fluids, online erschienen am 07.07.2026. Verfasst von C. P. AbdulGafoor und 4 weiteren Autor:innen. Die Arbeit nennt 57 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Bioinspired flapping-wing propulsion for micro air vehicles exploits flow unsteadiness to enhance lift at lower flight speeds and Reynolds numbers. However, it poses challenges, including leading edge vortex (LEV) detachment and, eventually, dynamic stall. The present study investigates the LEV detachment mechanism and its control using an alternating current dielectric barrier discharge plasma actuator on a two-dimensional pure plunging airfoil. The volumetric plasma body force generated by the plasma actuator is modeled through an indirect method based on the Navier–Stokes equations and the experimental velocity database. The starting vortex induced by the actuator and the wall-jet velocities are well captured, validating the plasma force distribution. We employ counter-flow plasma, which requires significantly less power than co-flow plasma. High-fidelity simulations of a pure plunging airfoil at a Reynolds number (Re) of 104 are carried out to assess the efficacy of steady and pulsed plasma actuation. The findings from this study confirm that, when plasma actuation is employed, the LEV remains attached to the leading edge shear layer for a longer duration. This results in prolonged circulation accumulation and enhanced lift. For example, the steady plasma actuation increased the lift coefficient by ≈8%−12% and delayed the onset of stall by Δ t/T≈6%−31%, where T is the plunging duration. In contrast, pulsed actuation with a Strouhal number (St) of 2 and a duty cycle (DC) of 0.75 achieves maximum benefits, as a 25% reduction in DC implies a proportionate decrease in power consumption.

Zitieren

APA

AbdulGafoor, C. P., Raghuram, B. B., Mehta, K. R., Arun, A., & Vadlamani, N. R. (2026). Mechanism of dynamic stall delay via leading edge vortex control by steady and pulsed plasma actuation. Physics of Fluids, 38(7). https://doi.org/10.1063/5.0331912

Vancouver

AbdulGafoor CP, Raghuram BB, Mehta KR, Arun A, Vadlamani NR. Mechanism of dynamic stall delay via leading edge vortex control by steady and pulsed plasma actuation. Physics of Fluids. 2026;38(7). doi:10.1063/5.0331912

BibTeX
@article{AbdulGafoor2026,
  author = {AbdulGafoor, C. P. and Raghuram, B. B. and Mehta, Krishma Rajesh and Arun, Aniruth and Vadlamani, Nagabhushana Rao},
  title = {Mechanism of dynamic stall delay via leading edge vortex control by steady and pulsed plasma actuation},
  journal = {Physics of Fluids},
  year = {2026},
  volume = {38},
  number = {7},
  doi = {10.1063/5.0331912}
}
Kostenlos starten →