Effect of Mach number on shock wave/turbulent boundary layer interaction over a hypersonic compression corner
Physics of Fluids · 01.07.2026 · 38 (7)
DOI: 10.1063/5.0329426 ↗Kurz gefasst
Fachartikel in der Zeitschrift Physics of Fluids, online erschienen am 14.07.2026. Verfasst von Xiaohang Dai und 4 weiteren Autor:innen. Die Arbeit nennt 59 Literaturangaben. Gefördert von: National Natural Science Foundation of China, National Supercomputing Center of Tianjin, Computer Network Information Center, Chinese Academy of Sciences.
Abstract (Originalsprache)
This paper adopts direct numerical simulation to investigate the effect of Mach number on shock wave/turbulent boundary layer interaction over a hypersonic compression corner with inflow Mach numbers Ma∞=3,5,7. It systematically characterizes the flow phenomena in the interaction region at different inflow Mach numbers, including the flow structure and the evolution of the turbulent boundary layer. The mean skin friction decomposition method is employed to investigate the impact of Mach number on skin friction generation in the interaction region. Additionally, bidimensional empirical mode decomposition (BEMD) is used to quantify how turbulent structures with different spanwise scales contribute to wall friction. The results indicate that an increase in the inflow Mach number shrinks the size of the separation zone, causes the main shock wave closer to the wall, and suppresses the development of the downstream turbulent boundary layer. Furthermore, increasing the Mach number suppresses the turbulence amplification caused by the interaction. To explain these observations, the transport equation of the turbulent kinetic energy (TKE) is analyzed. It is found that the turbulence production term primarily contributes to the TKE generation in the separation zone, and both the turbulence production term and the TKE gradually decrease as the inflow Mach number increases. Additionally, friction decomposition research conducted under varying flow conditions indicates that the turbulence-related term is a dominant contributor to skin friction. BEMD is utilized to decompose the turbulence-related term into four modes with specific spanwise scales. The results indicate that wall friction upstream of the corner is primarily influenced by small-scale structures near the wall. In contrast, wall friction in the interaction and reattachment region is dominated by large-scale structures in the outer region.
Förderung
- National Natural Science Foundation of China
- National Supercomputing Center of Tianjin
- Computer Network Information Center, Chinese Academy of Sciences
Zitieren
APA
Dai, X., Ji, X., Li, X., Zhang, C., & Yu, C. (2026). Effect of Mach number on shock wave/turbulent boundary layer interaction over a hypersonic compression corner. Physics of Fluids, 38(7). https://doi.org/10.1063/5.0329426
Vancouver
Dai X, Ji X, Li X, Zhang C, Yu C. Effect of Mach number on shock wave/turbulent boundary layer interaction over a hypersonic compression corner. Physics of Fluids. 2026;38(7). doi:10.1063/5.0329426
BibTeX
@article{Dai2026,
author = {Dai, Xiaohang and Ji, Xiangxin and Li, Xinliang and Zhang, Chuanhong and Yu, Changping},
title = {Effect of Mach number on shock wave/turbulent boundary layer interaction over a hypersonic compression corner},
journal = {Physics of Fluids},
year = {2026},
volume = {38},
number = {7},
doi = {10.1063/5.0329426}
}
EUVIMED