EUVIMEDEUVIMED entdecken
Crossref

Development of Marx adder based solid-state electron gun modulator

Umakant Yerge iD, Abhijit Tillu iD, Arka Mitra iD, Dhruva Bhattacharjee iD, Love Mishra iD, Hemant Sarukte iD, Sabyasachi Mitra iD

Review of Scientific Instruments · 01.08.2026 · 97 (8)

DOI: 10.1063/5.0326337 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Review of Scientific Instruments, online erschienen am 05.08.2026. Verfasst von Umakant Yerge und 6 weiteren Autor:innen. Beteiligte Einrichtung: Homi Bhabha National Institute, Mumbai 400094, India. Die Arbeit nennt 26 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Electron guns are indispensable components of accelerators, generating electrons under the application of high voltage. High-voltage pulse modulators provide the pulsed extraction voltage required to produce a pulsed electron beam. A novel solid-state Marx adder-based gun modulator has been developed to drive a test-bench electron gun at the Electron Beam Center (EBC), Mumbai, India. The modulator delivers up to 40 kV, 3 A pulses with a pulse width of 10 μs at a repetition rate of 200 Hz. This work presents the design considerations, analysis, and implementation of the solid-state modulator, with emphasis on addressing the unique non-linear load characteristics of the electron gun. Common-mode chokes are employed innovatively for isolated charging of Marx stages. Development of this modulator is significant from the perspective that it ensures a wide range of control over pulse voltage, pulse repetition rate, and pulse width of electron beam generation for the user. Experimental validation with resistive and electron gun loads is presented in detail in this paper.

Autor:innen und Institutionen

  • Homi Bhabha National Institute, Mumbai 400094, India.
  • Bhabha Atomic Research Centre, Mumbai 400085, India.

ORCID-Profile: Umakant Yerge, Abhijit Tillu, Arka Mitra, Dhruva Bhattacharjee, Love Mishra, Hemant Sarukte, Sabyasachi Mitra

Zitieren

APA

Yerge, U., Tillu, A., Mitra, A., Bhattacharjee, D., Mishra, L., Sarukte, H., & Mitra, S. (2026). Development of Marx adder based solid-state electron gun modulator. Review of Scientific Instruments, 97(8). https://doi.org/10.1063/5.0326337

Vancouver

Yerge U, Tillu A, Mitra A, Bhattacharjee D, Mishra L, Sarukte H, et al. Development of Marx adder based solid-state electron gun modulator. Review of Scientific Instruments. 2026;97(8). doi:10.1063/5.0326337

BibTeX
@article{Yerge2026,
  author = {Yerge, Umakant and Tillu, Abhijit and Mitra, Arka and Bhattacharjee, Dhruva and Mishra, Love and Sarukte, Hemant and Mitra, Sabyasachi},
  title = {Development of Marx adder based solid-state electron gun modulator},
  journal = {Review of Scientific Instruments},
  year = {2026},
  volume = {97},
  number = {8},
  doi = {10.1063/5.0326337}
}
Kostenlos starten →