Research on slamming load-reduction method for seaplane water landing based on pressure-relievable cavities
Physics of Fluids · 01.03.2026 · 38 (3)
DOI: 10.1063/5.0325024 ↗Kurz gefasst
Fachartikel in der Zeitschrift Physics of Fluids, online erschienen am 23.03.2026. Verfasst von Jiahe Liu und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 49 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Foundation Research Funds for the Central Universities.
Abstract (Originalsprache)
This study proposes a pressure-relievable cavity method to mitigate slamming loads during seaplane water landings. The method reduces impact loads by decreasing the forebody wetted area during initial water entry. Validated through prototype-scale numerical simulations and 1:40 scale combined numerical-experimental tests for zero-pitch-angle landing, the approach achieves over 30% load reduction in calm water and over 20% load reduction during landings near the wave crest. Under the following wave conditions, slamming loads are classified into single-peak, primary–secondary-peak, and multi-peak patterns. The effectiveness of full- and single-cavity activation is evaluated across these regimes. While cavity-induced free-surface disturbances may generate new high-pressure zones, potentially diminishing or reversing load reduction, optimal performance is achieved by tailoring cavity activation to the slamming pattern. Full activation is most effective for single-peak and primary–secondary-peak cases, whereas selective activation disrupts high-pressure regions. For the multi-peak case, opening a forward cavity reduces loads by disrupting the forebody high-pressure region and avoiding the aftbody slamming amplification from rear- or full-cavity activation. This work provides a design framework for effective slamming mitigation and enhanced safety in emergency seaplane operations.
Förderung
- National Natural Science Foundation of China
- Foundation Research Funds for the Central Universities
Zitieren
APA
Liu, J., He, J., Hong, Y., & Gong, Z. (2026). Research on slamming load-reduction method for seaplane water landing based on pressure-relievable cavities. Physics of Fluids, 38(3). https://doi.org/10.1063/5.0325024
Vancouver
Liu J, He J, Hong Y, Gong Z. Research on slamming load-reduction method for seaplane water landing based on pressure-relievable cavities. Physics of Fluids. 2026;38(3). doi:10.1063/5.0325024
BibTeX
@article{Liu2026,
author = {Liu, Jiahe and He, Jianyong and Hong, Yao and Gong, Zhaoxin},
title = {Research on slamming load-reduction method for seaplane water landing based on pressure-relievable cavities},
journal = {Physics of Fluids},
year = {2026},
volume = {38},
number = {3},
doi = {10.1063/5.0325024}
}
EUVIMED