Stable low-resistance ohmic contact on GaN via an oxynitride interlayer over 20–200 °C: Mechanisms and performance
Journal of Applied Physics · 14.06.2026 · 139 (22)
DOI: 10.1063/5.0324776 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Applied Physics, online erschienen am 12.06.2026. Verfasst von Shujie Xie und 10 weiteren Autor:innen. Die Arbeit nennt 65 Literaturangaben. Gefördert von: CAS Project for Young Scientists in Basic Research.
Abstract (Originalsprache)
Achieving reliable, low-resistance ohmic contacts in GaN-based devices is fundamentally limited by interfaces with high interface-state densities, which are a direct result of essential fabrication steps. For example, etching to expose the n-GaN layer in laser diodes introduces surface defects, while regrown n+-GaN surfaces in selective-area regrowth (SAG) HEMTs exhibit high interface states due to growth kinetics. These high-frequency and high-power devices typically operate at elevated junction temperatures (100–200 °C), where high interface-state density exacerbates Fermi-level pinning (FLP) effect, leading to unstable contact resistance and reliability concerns. To address this issue, we propose and validate a universal interface engineering strategy: inserting an oxynitride interlayer. We systematically study Ti-based ohmic contacts on SAG n+-GaN from 20 to 200 °C, comparing untreated interfaces with those modified by TiOxNy or GaOxNy interlayers. Through correlated microstructural analysis, temperature-dependent electrical measurements, and conductance-based interface-state characterization, we show that the interlayers effectively suppress interface-state density, mitigate FLP, and stabilize the Schottky barrier height. While untreated contacts display non-monotonic and degrading resistivity with temperature, interlayer-modified contacts exhibit a stable, monotonic decrease in specific contact resistivity. The GaOxNy interlayer yields the best performance, achieving ∼10−8 Ω cm2 order above 100 °C. This work elucidates the critical role of interface states in contact thermal instability and provides a viable materials solution for stable ohmic contacts in GaN-based devices that operate at high temperatures with damaged or low-quality contact interface.
Förderung
- CAS Project for Young Scientists in Basic Research
Zitieren
APA
Xie, S., Xu, H., Wan, C., Hu, Z., Cheng, Z., Wu, X., Mi, C., Yi, B., Lian, M., He, Y., & Zhang, Y. (2026). Stable low-resistance ohmic contact on GaN via an oxynitride interlayer over 20–200 °C: Mechanisms and performance. Journal of Applied Physics, 139(22). https://doi.org/10.1063/5.0324776
Vancouver
Xie S, Xu H, Wan C, Hu Z, Cheng Z, Wu X, et al. Stable low-resistance ohmic contact on GaN via an oxynitride interlayer over 20–200 °C: Mechanisms and performance. Journal of Applied Physics. 2026;139(22). doi:10.1063/5.0324776
BibTeX
@article{Xie2026,
author = {Xie, Shujie and Xu, Hengyu and Wan, Caiping and Hu, Zongyang and Cheng, Zhe and Wu, Xuankun and Mi, Chanxin and Yi, Boyang and Lian, Mengxiao and He, Yingrui and Zhang, Yun},
title = {Stable low-resistance ohmic contact on GaN via an oxynitride interlayer over 20–200 °C: Mechanisms and performance},
journal = {Journal of Applied Physics},
year = {2026},
volume = {139},
number = {22},
doi = {10.1063/5.0324776}
}
EUVIMED