A latent-heat-coupled wellbore heat-transfer model with phase-change materials
Physics of Fluids · 01.04.2026 · 38 (4)
DOI: 10.1063/5.0324428 ↗Kurz gefasst
Fachartikel in der Zeitschrift Physics of Fluids, online erschienen am 17.04.2026. Verfasst von Qingyao Wang und 8 weiteren Autor:innen. Die Arbeit wurde bisher 28-mal zitiert (Crossref) und nennt 40 Literaturangaben. Gefördert von: National Natural Science Foundation of China, China National Petroleum Corporation.
Abstract (Originalsprache)
Deep and ultra-deep resource development is increasingly constrained by extreme downhole temperatures, which compromise drilling safety, tool integrity, and drilling-fluid performance. Conventional cooling measures—including drilling-parameter optimization, adjustment of drilling-fluid properties, surface cooling, and improved drillstring insulation—have achieved partial success; however, under deep/ultra-deep conditions, they often yield limited temperature reductions at high cost and with restricted adaptability. Phase-change materials (PCMs) offer an alternative approach by moderating wellbore-fluid temperature through heat absorption during melting and heat release during solidification. Nevertheless, prior studies have emphasized PCM development, whereas wellbore-scale heat-transfer modeling and the associated latent-heat coupling mechanisms remain insufficiently studied. To address this gap, a latent-heat-coupled wellbore heat-transfer model is developed by incorporating an enthalpy–temperature relation obtained from single-particle PCM simulations as a latent-heat source term. The model is validated against measurements from a self-built drilling-fluid circulation test rig, achieving an average prediction error below 5%. A case study for an 8000 m ultra-deep well indicates that adding 15% erythritol reduces the bottom-hole temperature by 16.6 °C. The proposed model establishes a sound theoretical basis for cooling design and evaluation using PCMs during drilling.
Förderung
- National Natural Science Foundation of China
- China National Petroleum Corporation
Zitieren
APA
Wang, Q., Xiao, D., Tang, G., Lu, Z., Ge, X., Zou, C., Huang, Q., Jiang, D., & Li, G. (2026). A latent-heat-coupled wellbore heat-transfer model with phase-change materials. Physics of Fluids, 38(4). https://doi.org/10.1063/5.0324428
Vancouver
Wang Q, Xiao D, Tang G, Lu Z, Ge X, Zou C, et al. A latent-heat-coupled wellbore heat-transfer model with phase-change materials. Physics of Fluids. 2026;38(4). doi:10.1063/5.0324428
BibTeX
@article{Wang2026,
author = {Wang, Qingyao and Xiao, Dong and Tang, Gui and Lu, Zhongqiang and Ge, Xingbo and Zou, Changjun and Huang, Qi and Jiang, Daichao and Li, Gao},
title = {A latent-heat-coupled wellbore heat-transfer model with phase-change materials},
journal = {Physics of Fluids},
year = {2026},
volume = {38},
number = {4},
doi = {10.1063/5.0324428}
}
EUVIMED