Two-dimensional magneto-hydro-dynamic simulation of breaking arc characteristics in medium-voltage switchgear
Physics of Fluids · 01.05.2026 · 38 (5)
DOI: 10.1063/5.0323412 ↗Kurz gefasst
Fachartikel in der Zeitschrift Physics of Fluids, online erschienen am 19.05.2026. Verfasst von Lijun Wang und 6 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Medium-voltage (MV) switchgear plays an important role in both control and protection within power systems. When a circuit is interrupted, an electric arc is inevitably produced. The performance of arc extinction directly influences the stability and reliability of the entire power supply system. This study focuses on the characteristics of arc extinguishing in MV switchgear by means of numerical simulation methods. A two-dimensional magneto-hydro-dynamic model is established to describe the gas arc behavior in a load switch during the interruption process. Based on the simulation results, the influences of transverse magnetic field, contact separation speed, arc current, gas pressure, and dielectric medium on arc dynamic characteristics are analyzed in detail. It is found that the transverse magnetic field drives the arc to deflect under the Lorentz force. With the increase in magnetic field intensity, the Lorentz force becomes stronger, which helps accelerate the arc extinguishing process. Faster contact separation contributes to a higher arc voltage and voltage peak during the breaking process, thus improving the interruption capability. In the case of hexafluoride–nitrogen (SF6–N2) mixtures, a higher proportion of SF6 leads to higher arc voltage peaks and breakdown voltages, which is favorable for arc quenching. The simulation results obtained in this work can provide theoretical support for the structural optimization and performance improvement of MV switchgears.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Wang, L., Huang, K., Liu, X., Wang, G., Liu, T., Zhang, X., & Liu, J. (2026). Two-dimensional magneto-hydro-dynamic simulation of breaking arc characteristics in medium-voltage switchgear. Physics of Fluids, 38(5). https://doi.org/10.1063/5.0323412
Vancouver
Wang L, Huang K, Liu X, Wang G, Liu T, Zhang X, et al. Two-dimensional magneto-hydro-dynamic simulation of breaking arc characteristics in medium-voltage switchgear. Physics of Fluids. 2026;38(5). doi:10.1063/5.0323412
BibTeX
@article{Wang2026,
author = {Wang, Lijun and Huang, Kexiang and Liu, Xinyi and Wang, Gang and Liu, Tongqi and Zhang, Xuanrui and Liu, Junxian},
title = {Two-dimensional magneto-hydro-dynamic simulation of breaking arc characteristics in medium-voltage switchgear},
journal = {Physics of Fluids},
year = {2026},
volume = {38},
number = {5},
doi = {10.1063/5.0323412}
}
EUVIMED