Enhanced dopant activation in heavily doped epitaxial silicon via sequential phosphorus–antimony co-doping
APL Materials · 01.05.2026 · 14 (5)
DOI: 10.1063/5.0323304 ↗Kurz gefasst
Fachartikel in der Zeitschrift APL Materials, online erschienen am 08.05.2026. Verfasst von Minhyeok Jeong und 3 weiteren Autor:innen. Die Arbeit nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea, Ministry of Trade, Industry and Energy.
Abstract (Originalsprache)
As silicon devices continue to scale, source–drain series resistance has become a critical limitation, which has motivated the development of heavily doped n-type silicon formed by in situ epitaxial doping. However, phosphorus, the most widely used n-type dopant, exhibits limited electrical activation at high concentrations due to the formation of phosphorus–vacancy complexes. In this work, we report the first experimental investigation of phosphorus–antimony (P–Sb) co-doping in epitaxial silicon grown by ultrahigh-vacuum chemical vapor deposition using a metal–organic antimony precursor. We show that simultaneous P–Sb co-doping is ineffective in the heavily doped regime, whereas a sequential co-doping strategy that introduces phosphorus during the initial growth stage followed by antimony effectively enhances dopant activation. The optimized sequentially co-doped film achieved a carrier concentration of 1.06 × 1020 cm−3, a Hall mobility of 71.25 cm2 V−1 s−1, and a conductivity of 1208 Ω−1 cm−1. The efficiency of the dopant activation evaluated using areal carrier and dopant densities from Hall-effect measurements and secondary ion mass spectrometry increased from 16.6% for phosphorus-only doping to 63.9% for sequential co-doping. Subsequent oxygen-ambient rapid thermal annealing suppressed phosphorus out-diffusion and reduced sheet resistance from 275 to 45.1 Ω/sq, among the lowest values reported for heavily doped n-type silicon. These results demonstrate that sequential P–Sb co-doping enabled by a metal–organic antimony precursor provides an effective and scalable approach to grow highly conductive n-type silicon epitaxial layers for advanced source–drain engineering.
Förderung
- National Research Foundation of Korea
- Ministry of Trade, Industry and Energy
Zitieren
APA
Jeong, M., Kim, S., Lee, J., & Heo, J. (2026). Enhanced dopant activation in heavily doped epitaxial silicon via sequential phosphorus–antimony co-doping. APL Materials, 14(5). https://doi.org/10.1063/5.0323304
Vancouver
Jeong M, Kim S, Lee J, Heo J. Enhanced dopant activation in heavily doped epitaxial silicon via sequential phosphorus–antimony co-doping. APL Materials. 2026;14(5). doi:10.1063/5.0323304
BibTeX
@article{Jeong2026,
author = {Jeong, Minhyeok and Kim, Sujong and Lee, Jaejin and Heo, Junseok},
title = {Enhanced dopant activation in heavily doped epitaxial silicon via sequential phosphorus–antimony co-doping},
journal = {APL Materials},
year = {2026},
volume = {14},
number = {5},
doi = {10.1063/5.0323304}
}
EUVIMED