EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

On-machine dressing of cup-shaped diamond grinding wheels for high-quality hemispherical resonator manufacturing

Junhan Liu, Shayu Song, Shanyi Ma, Yu Jia, Chensheng Wang, Jianguo Zhang, Jianfeng Xu

Nanotechnology and Precision Engineering · 01.12.2026 · 9 (4)

DOI: 10.1063/5.0322186 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanotechnology and Precision Engineering, online erschienen am 28.07.2026. Verfasst von Junhan Liu und 6 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Program for HUST Academic Frontier Youth Team, Self-developed Project ZZ14 of Huazhong Institute of Electro-Optics, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The fused silica hemispherical resonator, a critical component in hemispherical resonator gyroscopes, requires exceptional surface integrity to ensure high quality factors (Q factors) and minimal frequency splitting. Ultra-precision grinding is commonly used for shaping such brittle materials, and the performance of the grinding wheel plays a crucial role in machining outcomes. This study integrates one-step forming with a bronze-bonded cup-shaped diamond grinding wheel and on-machine dressing techniques targeting both the cutting edge and wheel matrix. A systematic investigation from tool geometry to resonator performance is conducted. The radial runouts of the cutting edge and matrix are significantly reduced to 5.666 and 2 μm, respectively. This improvement leads to fewer surface defects and shallower grinding marks, yielding a surface roughness below 0.02 μm and reducing the peak-to-valley error by 73% to 85.27 nm. Geometric accuracies at the resonator level are improved, with circularities of the inner and outer hemispheres and concentricity reduced by 46.15%, 57.89%, and 28.57%, respectively. The Q factor of the resonator is improved to 3.17 × 107, while frequency splitting is reduced to 0.0156 Hz. These results confirm that simultaneous dressing enhances tool integrity, enabling high-quality surface generation and improved resonator performance. This study provides a viable approach for fabricating high-Q resonators.

Förderung

  • Program for HUST Academic Frontier Youth Team
  • Self-developed Project ZZ14 of Huazhong Institute of Electro-Optics
  • National Natural Science Foundation of China

Zitieren

APA

Liu, J., Song, S., Ma, S., Jia, Y., Wang, C., Zhang, J., & Xu, J. (2026). On-machine dressing of cup-shaped diamond grinding wheels for high-quality hemispherical resonator manufacturing. Nanotechnology and Precision Engineering, 9(4). https://doi.org/10.1063/5.0322186

Vancouver

Liu J, Song S, Ma S, Jia Y, Wang C, Zhang J, et al. On-machine dressing of cup-shaped diamond grinding wheels for high-quality hemispherical resonator manufacturing. Nanotechnology and Precision Engineering. 2026;9(4). doi:10.1063/5.0322186

BibTeX
@article{Liu2026,
  author = {Liu, Junhan and Song, Shayu and Ma, Shanyi and Jia, Yu and Wang, Chensheng and Zhang, Jianguo and Xu, Jianfeng},
  title = {On-machine dressing of cup-shaped diamond grinding wheels for high-quality hemispherical resonator manufacturing},
  journal = {Nanotechnology and Precision Engineering},
  year = {2026},
  volume = {9},
  number = {4},
  doi = {10.1063/5.0322186}
}
Kostenlos starten →