EUVIMEDEUVIMED entdecken
Crossref

Numerical investigation of two-stage acoustofluidic separation based on acoustic contrast factor differences

Jinhai Ouyang, Jianhua Qin, Yongyan Zhou, Zhaokun Xian

Physics of Fluids · 01.06.2026 · 38 (6)

DOI: 10.1063/5.0321588 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Physics of Fluids, online erschienen am 18.06.2026. Verfasst von Jinhai Ouyang und 3 weiteren Autor:innen. Die Arbeit nennt 51 Literaturangaben. Gefördert von: Natural Science Foundation of Guangxi Zhuang Autonomous Region, Guilin University of Technology Research Fund.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the field of micro-particle separation, acoustic separation technology is widely applied in areas such as fluid detection and biomedicine due to its non-contact and nondestructive nature. Existing methods predominantly rely on size differences, making it difficult to effectively separate particles with diverse acoustic properties and similar sizes, particularly due to the lack of systematic utilization of both the sign and magnitude of the acoustic contrast factor. To address this, we propose a two-stage sorting chip based on surface acoustic waves (SAW) and investigate its performance through numerical simulations using the finite element method. By integrating a standing surface acoustic wave (SSAW) field in a rectangular microchannel and tilted-angle standing surface acoustic wave (TaSSAW) field in a tapered microchannel, and by combining the sign and magnitude information of the acoustic contrast factor, the chip design achieves efficient and continuous separation of polycaprolactone (PCL), polystyrene (PS), and polymethyl methacrylate (PMMA) on a single device. Theoretically, the trajectory slope is derived from particle force balance as a key parameter, which successfully characterizes the longitudinal displacement and reveals its quantitative relationships: non-monotonic dependence on the tilt angle, negative correlation with flow velocity, and positive correlation with the acoustic radiation force. The simulation results show that the scheme enables pre-separation of PCL and achieves optimal separation of PS and PMMA at a tilt angle of 10°. Furthermore, the study clarifies the coordinated regulation between flow velocity and acoustic pressure (e.g., 6 mm/s corresponds to 168 kPa). Under these optimized conditions, a maximum separation distance of approximately 600 μm is predicted. This computational study provides a new approach for multi-target sorting of same-sized particles in acoustofluidics and offers theoretical guidance for future experimental implementations.

Förderung

  • Natural Science Foundation of Guangxi Zhuang Autonomous Region
  • Guilin University of Technology Research Fund

Zitieren

APA

Ouyang, J., Qin, J., Zhou, Y., & Xian, Z. (2026). Numerical investigation of two-stage acoustofluidic separation based on acoustic contrast factor differences. Physics of Fluids, 38(6). https://doi.org/10.1063/5.0321588

Vancouver

Ouyang J, Qin J, Zhou Y, Xian Z. Numerical investigation of two-stage acoustofluidic separation based on acoustic contrast factor differences. Physics of Fluids. 2026;38(6). doi:10.1063/5.0321588

BibTeX
@article{Ouyang2026,
  author = {Ouyang, Jinhai and Qin, Jianhua and Zhou, Yongyan and Xian, Zhaokun},
  title = {Numerical investigation of two-stage acoustofluidic separation based on acoustic contrast factor differences},
  journal = {Physics of Fluids},
  year = {2026},
  volume = {38},
  number = {6},
  doi = {10.1063/5.0321588}
}
Kostenlos starten →