EUVIMEDEUVIMED entdecken
Crossref

Development of a two-stage amplification microgripper for high-precision applications

Xiaodong Chen iD, Huibin Sun, Huifeng Tan, Fengjie Tian

Review of Scientific Instruments · 01.05.2026 · 97 (5)

DOI: 10.1063/5.0321394 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Review of Scientific Instruments, online erschienen am 01.05.2026. Verfasst von Xiaodong Chen und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Shenyang Ligong University, Shenyang 110000, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 33 Literaturangaben. Gefördert von: National Natural Science Foundation of China, National Key Research and Development Program of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Microgrippers are precision actuation devices designed for the capture, release, and manipulation of microscale objects. The key challenge in achieving high-precision micro-grasping operations lies in suppressing the parasitic displacement of the gripping jaws. This paper proposes a two-stage amplification mechanism with low parasitic displacement to achieve high-precision micro-grasping operations of the microgripper. When the clamping displacement direction of the microgripper aligns with the desired motion direction, parasitic displacement is minimized. The second-stage amplification mechanism is directly connected to the microgripper’s output end, which determines the magnitude of parasitic displacement. Among these, a symmetrical compound parallelogram mechanism with flexure hinges is introduced as the second stage to fundamentally minimize parasitic displacement. Simulation results show that the proposed externally actuated microgripper with displacement compensation achieves a parasitic displacement rate of only 0.158%. Experimental results demonstrate that under an air pressure of 0.6 MPa, the prototype achieves a total output displacement of 490.3 μm, a total amplification ratio of 29.1, and a measured first-order natural frequency of 1625 Hz. The experimental results validate the rationality of the design, indicating the potential of this microgripper for micromanipulation tasks requiring both a large stroke and high precision.

Autor:innen und Institutionen

  • School of Mechanical Engineering, Shenyang Ligong University, Shenyang 110000, China.
  • School of Aerospace, Harbin Institute of Technology, Harbin 150080, China.

ORCID-Profile: Xiaodong Chen

Förderung

  • National Natural Science Foundation of China
  • National Key Research and Development Program of China

Zitieren

APA

Chen, X., Sun, H., Tan, H., & Tian, F. (2026). Development of a two-stage amplification microgripper for high-precision applications. Review of Scientific Instruments, 97(5). https://doi.org/10.1063/5.0321394

Vancouver

Chen X, Sun H, Tan H, Tian F. Development of a two-stage amplification microgripper for high-precision applications. Review of Scientific Instruments. 2026;97(5). doi:10.1063/5.0321394

BibTeX
@article{Chen2026,
  author = {Chen, Xiaodong and Sun, Huibin and Tan, Huifeng and Tian, Fengjie},
  title = {Development of a two-stage amplification microgripper for high-precision applications},
  journal = {Review of Scientific Instruments},
  year = {2026},
  volume = {97},
  number = {5},
  doi = {10.1063/5.0321394}
}
Kostenlos starten →