EUVIMEDEUVIMED entdecken
Crossref

Film cooling behavior from shaped holes on a curved wall under nonuniform pressure gradients

Yanming Qiu, Li Zhang, Zhipeng Xu, Ming Ren, Huiren Zhu, Cunliang Liu

Physics of Fluids · 01.03.2026 · 38 (3)

DOI: 10.1063/5.0320819 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Physics of Fluids, online erschienen am 23.03.2026. Verfasst von Yanming Qiu und 5 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Film cooling over curved surfaces subjected to variable pressure gradients exhibits complex near-wall flow dynamics, which are strongly influenced by the local pressure gradient distribution and the mainstream flow structure. In this study, the film cooling response of different hole geometries on a single curved surface exposed to a highly nonuniform three-dimensional mainstream is investigated using numerical simulations, with particular emphasis on the coolant-to-mainstream pressure ratio (RP). The upstream region is dominated by a strong adverse pressure gradient (SAPG), which suppresses coolant discharge, induces near-wall recirculation, and leads to unstable and direction-sensitive jets' behavior for cylindrical holes. As RP increases, several holes remain susceptible to jet bifurcation, lift-off, and reverse entrainment, indicating the limited effectiveness of increasing RP alone. Analysis of boundary layer characteristics and coolant trajectories reveals three distinct flow-response modes: attached plate-like jets under mild adverse or favorable pressure gradients, forked distributions caused by separation and reattachment under moderate adverse pressure gradients, and reverse entrainment under SAPG conditions. Based on these mechanisms, two modified hole geometries—a racetrack-shaped (RS) hole and a forward-inclined fan-shaped hole—are proposed. Both geometries stabilize the coolant trajectory and mitigate SAPG-induced recirculation, with the RS hole providing the most robust near-wall attachment under SAPG conditions.

Zitieren

APA

Qiu, Y., Zhang, L., Xu, Z., Ren, M., Zhu, H., & Liu, C. (2026). Film cooling behavior from shaped holes on a curved wall under nonuniform pressure gradients. Physics of Fluids, 38(3). https://doi.org/10.1063/5.0320819

Vancouver

Qiu Y, Zhang L, Xu Z, Ren M, Zhu H, Liu C. Film cooling behavior from shaped holes on a curved wall under nonuniform pressure gradients. Physics of Fluids. 2026;38(3). doi:10.1063/5.0320819

BibTeX
@article{Qiu2026,
  author = {Qiu, Yanming and Zhang, Li and Xu, Zhipeng and Ren, Ming and Zhu, Huiren and Liu, Cunliang},
  title = {Film cooling behavior from shaped holes on a curved wall under nonuniform pressure gradients},
  journal = {Physics of Fluids},
  year = {2026},
  volume = {38},
  number = {3},
  doi = {10.1063/5.0320819}
}
Kostenlos starten →