EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Synthesis and composition control of epitaxial FeWO4 thin films using pulsed laser deposition

John G. Hylak, Ann Alekseenko, Emily R. Dunn, Lily Shiau, Harry A. Atwater

APL Materials · 01.05.2026 · 14 (5)

DOI: 10.1063/5.0320805 ↗

Kurz gefasst

Fachartikel in der Zeitschrift APL Materials, online erschienen am 13.05.2026. Verfasst von John G. Hylak und 4 weiteren Autor:innen. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: U.S. Department of Energy.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

We report the growth of epitaxial FeWO4 thin films on c-plane sapphire via pulsed laser deposition using a Fe2O3/WO3 target ablated in an O2 atmosphere. At a constant O2 pressure of 1 mTorr, x-ray diffraction (XRD) confirms FeWO4 as the major crystalline phase for substrate temperatures from 500 to 800 °C. As temperature increases, x-ray fluorescence (XRF) shows the Fe/W ratio remains nearly constant at 0.90 ± 0.02, while x-ray photoelectron spectroscopy (XPS) shows Fe3+ to Fe2+ conversion increases from 20% to 35%. Morphological analysis reveals phase separation, likely of amorphous Fe3+ oxide from crystalline FeWO4, increasing with Fe3+ conversion. This is attributed to an O-rich laser ablated flux, where conversion is driven by the Arrhenius temperature dependence of Fe3+ → Fe2+ reduction on the film surface. At a constant substrate temperature of 750 °C, XRD confirms FeWO4 formation for O2 pressures from 0.5 to 10 mTorr. As pressure increases, XRF shows the Fe/W ratio decreases from 0.98 to 0.70, while XPS shows Fe3+ conversion rises from 15% to 70%. Morphology shows phase separation decreasing with increasing Fe3+ conversion. This is attributed to scattering, where higher O2 pressure makes the laser ablated flux O-deficient relative to Fe and W, facilitating Fe2+ formation. Films with Fe3+ conversion above ∼30% and Fe/W ratios from 0.86 to 0.96 exhibit FeWO4 optical and electronic properties suitable for photoanode applications.

Förderung

  • U.S. Department of Energy

Zitieren

APA

Hylak, J. G., Alekseenko, A., Dunn, E. R., Shiau, L., & Atwater, H. A. (2026). Synthesis and composition control of epitaxial FeWO4 thin films using pulsed laser deposition. APL Materials, 14(5). https://doi.org/10.1063/5.0320805

Vancouver

Hylak JG, Alekseenko A, Dunn ER, Shiau L, Atwater HA. Synthesis and composition control of epitaxial FeWO4 thin films using pulsed laser deposition. APL Materials. 2026;14(5). doi:10.1063/5.0320805

BibTeX
@article{Hylak2026,
  author = {Hylak, John G. and Alekseenko, Ann and Dunn, Emily R. and Shiau, Lily and Atwater, Harry A.},
  title = {Synthesis and composition control of epitaxial FeWO4 thin films using pulsed laser deposition},
  journal = {APL Materials},
  year = {2026},
  volume = {14},
  number = {5},
  doi = {10.1063/5.0320805}
}
Kostenlos starten →