A new model for liquid loading prediction in jet-lifted annular gas wells
Physics of Fluids · 01.06.2026 · 38 (6)
DOI: 10.1063/5.0320803 ↗Kurz gefasst
Fachartikel in der Zeitschrift Physics of Fluids, online erschienen am 01.06.2026. Verfasst von Shuqiang Shi und 6 weiteren Autor:innen. Die Arbeit nennt 52 Literaturangaben.
Abstract (Originalsprache)
Liquid loading in jet-lifted gas wells producing through annular channels is difficult to predict because the inner tubing changes the flow area, wall confinement, gas–liquid interfacial shear distribution, and liquid-film reversal behavior. To address this problem, this study develops a mechanistic critical liquid-carrying model for gas-well annuli by coupling droplet entrainment in the gas core with liquid-film reversal on both the inner and outer annular walls. A vertical gas–liquid flow experiment was conducted in an annular test section to investigate flow-pattern evolution and pressure-gradient response under gas flow rates of 0.1–250 m3/h and liquid flow rates of 0.1–2.5 m3/h. The experimental observations show that liquid loading in annuli is characterized by nonuniform dual-wall liquid-film thickening, local film fallback, and interaction between upward-moving and downward-moving liquid films. Based on these observations, the proposed model incorporates annular geometric parameters, dual-wall liquid-film thickness distribution, droplet entrainment fraction, gas–liquid interfacial shear, liquid-film gravity, and wall friction. The model was evaluated using laboratory data, published annular-flow data, and field production data from annular gas wells. The predicted critical gas velocities showed good agreement with experimental and literature data, with most errors within ±20%. Field-data validation further showed that the proposed model correctly identified 39 of 44 annular-production cases, corresponding to a misclassification rate of 11.3%, which was lower than that of the Wallis, Belfroid, Barnea, and Turner–Hubbard–Duckler (THD) models. These results indicate that the proposed model provides a physically based and field-applicable method for predicting liquid loading and supporting production optimization in jet-lifted annular gas wells.
Zitieren
APA
Shi, S., Zhang, Y., Zhao, Z., Ye, C., Qi, D., Lin, S., & Lv, Z. (2026). A new model for liquid loading prediction in jet-lifted annular gas wells. Physics of Fluids, 38(6). https://doi.org/10.1063/5.0320803
Vancouver
Shi S, Zhang Y, Zhao Z, Ye C, Qi D, Lin S, et al. A new model for liquid loading prediction in jet-lifted annular gas wells. Physics of Fluids. 2026;38(6). doi:10.1063/5.0320803
BibTeX
@article{Shi2026,
author = {Shi, Shuqiang and Zhang, Yongcai and Zhao, Zhengyan and Ye, Changqin and Qi, Dan and Lin, Shaokang and Lv, Zhuang},
title = {A new model for liquid loading prediction in jet-lifted annular gas wells},
journal = {Physics of Fluids},
year = {2026},
volume = {38},
number = {6},
doi = {10.1063/5.0320803}
}
EUVIMED