A primary breakup model for pressure-swirl nozzles based on linear stability analysis
Physics of Fluids · 01.07.2026 · 38 (7)
DOI: 10.1063/5.0320425 ↗Kurz gefasst
Fachartikel in der Zeitschrift Physics of Fluids, online erschienen am 20.07.2026. Verfasst von Jintian Liu und 5 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben. Gefördert von: National Natural Science Foundation of China, The National Key Laboratory of Aerospace Liquid Propulsion, Xi'an Aerospace Propulsion Institute.
Abstract (Originalsprache)
This study investigates the primary breakup of a rotating annular liquid film issuing from a pressure-swirl nozzle. A dispersion relation is derived within the framework of linear stability theory by simultaneously accounting for liquid-film rotation and liquid viscosity. Based on the resulting instability characteristics, a Primary Fluctuation Breakup Model (PFBM) is developed to predict the breakup length and the Sauter mean diameter (SMD) during primary breakup. The proposed model is evaluated against a water/pressure-swirl-nozzle experimental dataset covering five injection-pressure conditions and shows improved predictive performance compared with the classical Linearized Instability Sheet Atomization model under the investigated conditions. Formulated in terms of dimensionless parameters, the PFBM provides a general physics-based framework for describing dynamically similar primary-breakup processes of rotating annular liquid films. A parametric study is then performed to examine the effects of swirl intensity, liquid Weber number, liquid Reynolds number, and gas-to-liquid velocity ratio on the instability characteristics and breakup behavior. The results show that increasing swirl intensity and Weber number enhances disturbance growth, shortens the breakup length, and increases the SMD during primary breakup. The Reynolds number mainly influences breakup through viscous damping, especially in the low-Reynolds-number regime, whereas the gas-to-liquid velocity ratio has a non-monotonic effect through interfacial aerodynamic shear. These results establish a clear physical link between operating conditions, dominant instability characteristics, and primary-breakup outcomes and provide a theoretical basis for improving the design and performance of pressure-swirl atomizers.
Förderung
- National Natural Science Foundation of China
- The National Key Laboratory of Aerospace Liquid Propulsion, Xi'an Aerospace Propulsion Institute
Zitieren
APA
Liu, J., Xi, X., Li, W., Xu, S., Jia, M., & Liu, H. (2026). A primary breakup model for pressure-swirl nozzles based on linear stability analysis. Physics of Fluids, 38(7). https://doi.org/10.1063/5.0320425
Vancouver
Liu J, Xi X, Li W, Xu S, Jia M, Liu H. A primary breakup model for pressure-swirl nozzles based on linear stability analysis. Physics of Fluids. 2026;38(7). doi:10.1063/5.0320425
BibTeX
@article{Liu2026,
author = {Liu, Jintian and Xi, Xi and Li, Wenfei and Xu, Shengli and Jia, Ming and Liu, Hong},
title = {A primary breakup model for pressure-swirl nozzles based on linear stability analysis},
journal = {Physics of Fluids},
year = {2026},
volume = {38},
number = {7},
doi = {10.1063/5.0320425}
}
EUVIMED