Thermal management and design optimization for ultrahigh-temperature–pressure experiments in multi-anvil presses
Review of Scientific Instruments · 01.04.2026 · 97 (4)
DOI: 10.1063/5.0319399 ↗Kurz gefasst
Fachartikel in der Zeitschrift Review of Scientific Instruments, online erschienen am 22.04.2026. Verfasst von Bingtao Feng und 2 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of High Pressure and Superhard Materials, Synergetic Extreme Condition User Facility, College of Physics, Jilin University, Chan…. Die Arbeit nennt 21 Literaturangaben. Gefördert von: Major Research Plan, National Natural Science Foundation of China, Jilin Province Major Science and Technology Program of China.
Abstract (Originalsprache)
The simultaneous generation of ultrahigh pressure and temperature in a multi-anvil press is crucial for studying planetary interiors and synthesizing novel materials. However, this goal is fundamentally challenged by severe thermal losses for the small sample-cell assembly, especially at ultrahigh pressures above 40 GPa. Our study employs a coupled thermal-electrical finite element model, validated by experimental data, to investigate the principles for enhancing the temperature generation capacity of an ultrahigh-pressure assembly. Our finite element model well reproduces the experimental heating results at ultrahigh pressures. The simulation analysis demonstrates the radial alumina insulation sleeve as the most significant factor for improving heating efficiency, while enlarging the diameter of the titanium carbide electrode is critical for enhancing interfacial stability. Counterintuitively, the adoption of high-thermal-conductivity sintered diamond anvils, while demanding more power, serves as an essential safety mechanism by preventing the melting of sintered diamond anvil truncations through the efficient heat dissipation. The combined optimization of these factors alleviates previous thermal bottlenecks and allows the assembly to reach noticeably higher temperatures (∼4000 K). This work thereby provides a rational framework and practical strategies for achieving more extreme ultrahigh temperature conditions at ultrahigh pressures through integrated thermal management.
Autor:innen und Institutionen
- State Key Laboratory of High Pressure and Superhard Materials, Synergetic Extreme Condition User Facility, College of Physics, Jilin University, Changchun 130012, China.
- Center for High Pressure Science and Technology Advanced Research (Shanghai), Shanghai 201203, China.
ORCID-Profile: Bingtao Feng, Zhaodong Liu, Longjian Xie
Förderung
- Major Research Plan
- National Natural Science Foundation of China
- Jilin Province Major Science and Technology Program of China
Zitieren
APA
Feng, B., Liu, Z., & Xie, L. (2026). Thermal management and design optimization for ultrahigh-temperature–pressure experiments in multi-anvil presses. Review of Scientific Instruments, 97(4). https://doi.org/10.1063/5.0319399
Vancouver
Feng B, Liu Z, Xie L. Thermal management and design optimization for ultrahigh-temperature–pressure experiments in multi-anvil presses. Review of Scientific Instruments. 2026;97(4). doi:10.1063/5.0319399
BibTeX
@article{Feng2026,
author = {Feng, Bingtao and Liu, Zhaodong and Xie, Longjian},
title = {Thermal management and design optimization for ultrahigh-temperature–pressure experiments in multi-anvil presses},
journal = {Review of Scientific Instruments},
year = {2026},
volume = {97},
number = {4},
doi = {10.1063/5.0319399}
}
EUVIMED