EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Assessing plasma face component thermal response to rotating 3D magnetic fields for SPARC tokamak

M. Scotto d'Abusco, A. Wingen, T. Looby, A. Kleiner, D. Corona, R. M. Churchill, N. Ferraro, S. Munaretto

Physics of Plasmas · 01.06.2026 · 33 (6)

DOI: 10.1063/5.0319031 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Physics of Plasmas, online erschienen am 04.06.2026. Verfasst von M. Scotto d'Abusco und 7 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fusion Energy Sciences.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Thermal response simulations of plasma-facing components (PFCs) in the SPARC tokamak, performed with the HEAT code, show that three-dimensional (3D) heat loads resulting from stationary n=1 perturbations require highly radiative scenarios, with up to 95% of the power crossing the separatrix (PSOL) being radiated, to maintain PFC temperatures within acceptable operational limits, whereas the application of slowly rotating 3D fields substantially reduces the thermal loads. The HEAT module, developed to predict heat loads from non-axisymmetric plasmas, is extended to model time-dependent heat flux patterns generated by rotating 3D fields, and a comprehensive thermal analysis is performed on PFCs subjected to both the maximum and minimum power loads, as well as to rotating heat flux distributions, to evaluate the temperature evolution for varying perturbation amplitudes and rotation frequencies. The extension of this analysis to 3D fields with toroidal mode number n=2 shows that this configuration leads to weaker localized heat flux peaks relative to the n=1 case, enabling safe operation with less than 80% of the power radiated when static 3D fields of low amplitude are applied, while using slowly rotating fields at higher amplitudes. These results indicate that n=2 perturbations are generally less detrimental to divertor power exhaust, emphasizing the strong dependence of divertor power exhaust on the characteristics of the applied 3D fields.

Förderung

  • Fusion Energy Sciences

Zitieren

APA

d'Abusco, M. S., Wingen, A., Looby, T., Kleiner, A., Corona, D., Churchill, R. M., Ferraro, N., & Munaretto, S. (2026). Assessing plasma face component thermal response to rotating 3D magnetic fields for SPARC tokamak. Physics of Plasmas, 33(6). https://doi.org/10.1063/5.0319031

Vancouver

d'Abusco MS, Wingen A, Looby T, Kleiner A, Corona D, Churchill RM, et al. Assessing plasma face component thermal response to rotating 3D magnetic fields for SPARC tokamak. Physics of Plasmas. 2026;33(6). doi:10.1063/5.0319031

BibTeX
@article{dAbusco2026,
  author = {d'Abusco, M. Scotto and Wingen, A. and Looby, T. and Kleiner, A. and Corona, D. and Churchill, R. M. and Ferraro, N. and Munaretto, S.},
  title = {Assessing plasma face component thermal response to rotating 3D magnetic fields for SPARC tokamak},
  journal = {Physics of Plasmas},
  year = {2026},
  volume = {33},
  number = {6},
  doi = {10.1063/5.0319031}
}
Kostenlos starten →