EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Framework for fabricating quality magnetoelastic thin films, FeGa as an example

Mohanchandra K. Panduranga, Margo Staruch, Peter Finkel, Gregory P. Carman

Journal of Applied Physics · 28.08.2026 · 140 (8)

DOI: 10.1063/5.0316844 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Physics, online erschienen am 27.08.2026. Verfasst von Mohanchandra K. Panduranga und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NSF, ERC, US, US, NAVY.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fabrication of magnetostrictive FeGa thin films with reliable properties remains challenging due to compositional variations, crystal structure, surface roughness, and residual stresses that strongly modify magnetoelastic behavior. This challenge is further complicated by the difficulty of measuring the film's magnetostrictive response. This study systematically investigates Fe85Ga15 films (100 and 250 nm) sputtered on Si and PMN–PT {[PB(Mg1/3Nb2/3)O3]0.68(PbTiO3)0.32} substrates at varying sputtering powers, argon pressures, and Cu or Ta buffer layers. X-ray diffraction indicates the presence of the disordered A2 phase. Residual stresses range from −150 to +350 MPa and strongly influence magnetic hardness and magnetoelastic performance. Cu buffer layers yield smoother film surfaces (Ra = 0.1 nm) and a softer/superior magnetic response compared to Ta layers (Ra = 1.12 nm). Magnetostriction was evaluated using both an indirect energy-based method and a direct cantilever beam measurement. Direct measurements show strains of ∼80 ppm for 100 nm and ∼40 ppm for 250 nm Fe85Ga15 films, while energy-based estimates give 55 and 24 ppm, respectively. These findings establish and describe a generalizable framework for the fabrication and comprehensive characterization of magnetostrictive thin films, applicable beyond the specific FeGa system studied here.

Förderung

  • NSF, ERC, US
  • US, NAVY

Zitieren

APA

Panduranga, M. K., Staruch, M., Finkel, P., & Carman, G. P. (2026). Framework for fabricating quality magnetoelastic thin films, FeGa as an example. Journal of Applied Physics, 140(8). https://doi.org/10.1063/5.0316844

Vancouver

Panduranga MK, Staruch M, Finkel P, Carman GP. Framework for fabricating quality magnetoelastic thin films, FeGa as an example. Journal of Applied Physics. 2026;140(8). doi:10.1063/5.0316844

BibTeX
@article{Panduranga2026,
  author = {Panduranga, Mohanchandra K. and Staruch, Margo and Finkel, Peter and Carman, Gregory P.},
  title = {Framework for fabricating quality magnetoelastic thin films, FeGa as an example},
  journal = {Journal of Applied Physics},
  year = {2026},
  volume = {140},
  number = {8},
  doi = {10.1063/5.0316844}
}
Kostenlos starten →