EUVIMEDEUVIMED entdecken
Crossref

ESO-based adaptive sliding mode control for DC–DC buck converters in track vibration energy harvesting

Bin Zhang, Hongxi Zhang, Xingwei Wei, Mingdi Xu, Jun Gao

Journal of Renewable and Sustainable Energy · 01.05.2026 · 18 (3)

DOI: 10.1063/5.0315664 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Renewable and Sustainable Energy, online erschienen am 21.05.2026. Verfasst von Bin Zhang und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 34 Literaturangaben. Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China, Science and Technology Project of State Grid Corporation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To address the challenges of severe input voltage fluctuations, complex operating conditions, and the difficulty of directly measuring critical states in railway track vibration energy harvesting systems, this study proposes an adaptive sliding mode control strategy based on the extended state observer (ESO) for real-time reconstruction of the input voltage in synchronous rectifier direct current–direct current (DC–DC) buck converters. The proposed strategy regards the input voltage as a quasi-steady disturbance and employs an ESO to estimate the input voltage and inductor current in real time. This approach enables operation using only output voltage feedback, avoiding reliance on additional sensors for inductor current or input voltage measurement. Compared to proportional–integral–derivative control, the proposed strategy reduces the settling time by 68.9%, overshoot by 13%, and output ripple by 86.1% under sinusoidal input voltage disturbances in simulation. Further hardware-in-the-loop experiments conducted on the dSPACE MicroLabBox platform show that this control strategy effectively suppresses the dynamic impact caused by input voltage disturbances and achieves rapid regulation, ensuring stable 5 V output voltage regulation suitable for powering ZigBee wireless sensor nodes. Efficiency tests indicate that the converter maintains high conversion efficiency over a load range from 1 to 100 Ω, exceeding 80% under light-load conditions and achieving a peak efficiency of 90%, attributable to the synergy between synchronous rectification and the proposed adaptive control method. This work presents a high-efficiency DC–DC power converter design that operates using only output voltage feedback, enabling maintenance-free deployment in remote railway vibration energy harvesting systems.

Förderung

  • National Key Research and Development Program of China
  • National Natural Science Foundation of China
  • Science and Technology Project of State Grid Corporation of China
  • Young Scholars Program of Shandong University, Weihai

Zitieren

APA

Zhang, B., Zhang, H., Wei, X., Xu, M., & Gao, J. (2026). ESO-based adaptive sliding mode control for DC–DC buck converters in track vibration energy harvesting. Journal of Renewable and Sustainable Energy, 18(3). https://doi.org/10.1063/5.0315664

Vancouver

Zhang B, Zhang H, Wei X, Xu M, Gao J. ESO-based adaptive sliding mode control for DC–DC buck converters in track vibration energy harvesting. Journal of Renewable and Sustainable Energy. 2026;18(3). doi:10.1063/5.0315664

BibTeX
@article{Zhang2026,
  author = {Zhang, Bin and Zhang, Hongxi and Wei, Xingwei and Xu, Mingdi and Gao, Jun},
  title = {ESO-based adaptive sliding mode control for DC–DC buck converters in track vibration energy harvesting},
  journal = {Journal of Renewable and Sustainable Energy},
  year = {2026},
  volume = {18},
  number = {3},
  doi = {10.1063/5.0315664}
}
Kostenlos starten →