Research and analysis of different grades silicon steels for an ultra-high-speed PM motor
AIP Advances · 01.06.2026 · 16 (6)
DOI: 10.1063/5.0313259 ↗Kurz gefasst
Fachartikel in der Zeitschrift AIP Advances, online erschienen am 09.06.2026. Verfasst von Ming Cheng und 3 weiteren Autor:innen. Die Arbeit nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Industry and Information Technology High-quality Major Development Special Project.
Abstract (Originalsprache)
Ultra-high-speed permanent magnet motors (UHSPMMs) operate at extremely high rotational speeds, which results in a very high operating frequency in the stator core. This causes significant losses of the core, in particular eddy current losses. Consequently, the reduction in the thickness of the silicon steel laminates has become a widely accepted method to minimize high frequency core losses. To study the influence of silicon steel sheets of various specifications on the electromagnetic properties of UHSPMMs, this paper examines four silicon steel sheets of varying thicknesses and their use in motors. First, the magnetic properties of four silicon steel sheets of four thicknesses, namely, 0.1, 0.15, 0.2 and 0.25 mm, were compared and analyzed, and their composition was separated from the core loss. When applied to a 25 kW, 95 kr/min ultra high-speed motor, the effects of the characteristics of the different grades of silicon steels on motor performance such as torque, core losses, and efficiency were analyzed. Finally, the motor was fabricated on 0.15 mm silicon steel, and the accuracy of the motor theoretical calculations was verified by testing. This document provides the basis for the selection of the basic materials for UHSPMMs, which have both scientific and technical value.
Förderung
- Ministry of Industry and Information Technology High-quality Major Development Special Project
Zitieren
APA
Cheng, M., Li, Z., Li, Y., & Pei, R. (2026). Research and analysis of different grades silicon steels for an ultra-high-speed PM motor. AIP Advances, 16(6). https://doi.org/10.1063/5.0313259
Vancouver
Cheng M, Li Z, Li Y, Pei R. Research and analysis of different grades silicon steels for an ultra-high-speed PM motor. AIP Advances. 2026;16(6). doi:10.1063/5.0313259
BibTeX
@article{Cheng2026,
author = {Cheng, Ming and Li, Zhiye and Li, Yuxiao and Pei, Ruilin},
title = {Research and analysis of different grades silicon steels for an ultra-high-speed PM motor},
journal = {AIP Advances},
year = {2026},
volume = {16},
number = {6},
doi = {10.1063/5.0313259}
}
EUVIMED