EUVIMEDEUVIMED entdecken
Crossref

Quasi-static pressure sensitivity characterization of single-mode optical fibers

C Charliac iD, I Ghorbel iD, V Kemlin iD, L Pastur iD, V Crozatier iD

Review of Scientific Instruments · 01.08.2026 · 97 (8)

DOI: 10.1063/5.0312684 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Review of Scientific Instruments, online erschienen am 03.08.2026. Verfasst von C Charliac und 4 weiteren Autor:innen. Beteiligte Einrichtung: Thales Research & Technology, 1 Avenue Augustin Fresnel, Palaiseau 91767, France. Die Arbeit nennt 19 Literaturangaben. Gefördert von: Direction Générale de l’Armement.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

We present a measurement setup designed to characterize the pressure sensitivity of single-mode optical fibers, whether freestanding or embedded within a structure. The system uses an unbalanced interferometer, with its long arm consisting of the fiber under test. This fiber is placed inside an air-sealed chamber and submerged in water. Pressure is modulated in a sinusoidal pattern at 1 Hz by injecting air above the water bath. Because the fiber is fully immersed in a water bath with large thermal capacitance, we expect the temperature fluctuations to be strongly attenuated at 1 Hz; thus, the fiber primarily experiences the applied pressure modulation rather than temperature-induced phase changes. We also detail the data processing method, which leverages the non-linear response of the interferometer to accurately extract the fiber’s pressure sensitivity. Using this setup, we characterize five standard optical fibers with different coatings, jackets, and geometries, obtaining pressure sensitivities ranging from 40 to 530 μrad Pa−1 m−1. The experimental results are in good agreement with predictions from a standard model. In addition, we demonstrate the setup capability to measure the pressure sensitivity of more complex samples, for which the model is no longer valid. As an illustration, we study how the fiber pressure sensitivity depends on the embedding depth for fibers inserted into Plexiglas plates. We believe that this experimental characterization setup can be useful for the development of new smart materials relying on fiber sensing.

Autor:innen und Institutionen

  • Thales Research & Technology, 1 Avenue Augustin Fresnel, Palaiseau 91767, France.
  • Thales AVS, 2 Rue Marcel Dassault, Vélizy-Villacoublay 78140, France.
  • Mechanical Engineering Dpt, LMI, ENSTA, Institut Polytechnique de Paris, Palaiseau 91120, France.

ORCID-Profile: C Charliac, I Ghorbel, V Kemlin, L Pastur, V Crozatier

Förderung

  • Direction Générale de l’Armement

Zitieren

APA

Charliac, C., Ghorbel, I., Kemlin, V., Pastur, L., & Crozatier, V. (2026). Quasi-static pressure sensitivity characterization of single-mode optical fibers. Review of Scientific Instruments, 97(8). https://doi.org/10.1063/5.0312684

Vancouver

Charliac C, Ghorbel I, Kemlin V, Pastur L, Crozatier V. Quasi-static pressure sensitivity characterization of single-mode optical fibers. Review of Scientific Instruments. 2026;97(8). doi:10.1063/5.0312684

BibTeX
@article{Charliac2026,
  author = {Charliac, C and Ghorbel, I and Kemlin, V and Pastur, L and Crozatier, V},
  title = {Quasi-static pressure sensitivity characterization of single-mode optical fibers},
  journal = {Review of Scientific Instruments},
  year = {2026},
  volume = {97},
  number = {8},
  doi = {10.1063/5.0312684}
}
Kostenlos starten →