EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design methodology and performance analysis of the asymmetric single-tooth claw-type rotor profile

Dantong Li, Kai Ma, Xiaoqian Chen, Chuang Wang, Jun Guo, Ziwen Xing, Zhilong He

International Journal of Fluid Engineering · 01.12.2026 · 3 (4)

DOI: 10.1063/5.0311334 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Fluid Engineering, online erschienen am 12.06.2026. Verfasst von Dantong Li und 6 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The asymmetric single-tooth claw-shaped rotor profile offers significant potential for the application of oil-free compressors, and enhancing its fluid performance becomes particularly important. This study develops its mathematical generation models and evaluates its performance through geometric analysis and comprehensive computational fluid dynamics (CFD) simulations. A systematic parameter sensitivity analysis is employed to define a reasonable design region for the profile parameters, and a flow optimization-based method is proposed for designing the suction and discharge ports of the claw-type pump. The influence of key geometric parameters on performance characteristics is thoroughly investigated. Results demonstrate that the asymmetric design can increase the discharge port area by up to 58%. Furthermore, a comparative CFD analysis of conventional symmetric and proposed asymmetric profiles is conducted for a typical 2 m3/h oil-free air compressor, examining geometric, thermodynamic, and dynamic performance. The asymmetric profile significantly reduces the load on the synchronous gear, decreases power loss during the discharge process, and effectively mitigates discharge pressure pulsation. Consequently, the volumetric and adiabatic efficiencies of the claw-type pump are improved by 2% and 3.4%, respectively. The application of these methodologies provides effective guidance for the design of claw-type vacuum pumps and compressors.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Li, D., Ma, K., Chen, X., Wang, C., Guo, J., Xing, Z., & He, Z. (2026). Design methodology and performance analysis of the asymmetric single-tooth claw-type rotor profile. International Journal of Fluid Engineering, 3(4). https://doi.org/10.1063/5.0311334

Vancouver

Li D, Ma K, Chen X, Wang C, Guo J, Xing Z, et al. Design methodology and performance analysis of the asymmetric single-tooth claw-type rotor profile. International Journal of Fluid Engineering. 2026;3(4). doi:10.1063/5.0311334

BibTeX
@article{Li2026,
  author = {Li, Dantong and Ma, Kai and Chen, Xiaoqian and Wang, Chuang and Guo, Jun and Xing, Ziwen and He, Zhilong},
  title = {Design methodology and performance analysis of the asymmetric single-tooth claw-type rotor profile},
  journal = {International Journal of Fluid Engineering},
  year = {2026},
  volume = {3},
  number = {4},
  doi = {10.1063/5.0311334}
}
Kostenlos starten →