EUVIMEDEUVIMED entdecken
Crossref

Microarc oxidation layer on aluminum surface significantly suppresses partial discharge at triple junction point on insulation surface

Zepeng Lv, Zhenyu Wu, Bo Li, Jianhong Song, Kai Wu, Yonghong Cheng

Applied Physics Letters · 09.03.2026 · 128 (10)

DOI: 10.1063/5.0310808 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Physics Letters, online erschienen am 10.03.2026. Verfasst von Zepeng Lv und 5 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 29 Literaturangaben. Gefördert von: National Science and Technology Major Project, National Natural Science Foundation of China, State Key Laboratory of Electrical Insulation and Power Equipment.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The surface discharge at metal/insulation/gas (or vacuum) triple junctions (TJs) poses a serious threat to the insulation reliability of high-voltage equipment. An insulation layer was fabricated on the surface of aluminum metal electrodes via microarc oxidation (MAO) to suppress surface discharge at the TJ. The partial discharge inception voltage was effectively increased by up to 54.5% with the MAO layer. At 1.5 kV, the average discharge magnitude per minute at the TJ decreased by up to 66.7% after MAO treatment. The composition of the insulation layer is primarily Al2O3 and Al2SiO5. As the MAO duration and voltage increase, the thickness and surface pore area ratio of the MAO layer increased continuously. The mechanism of partial discharge suppression was investigated by analyzing the layer's composition, resistivity, surface potential decay, and phase-resolved partial discharge spectrum. The analysis indicates that the mechanism primarily involves suppressing the direct or indirect movement of electrons from the metal electrode to the gas. Consequently, this suppression reduces both the number of seed charges for electron avalanches and the probability of avalanche initiation at the microscopic level. At the macro-level, the insulation layer eliminates the traditional TJ, establishing a TJ of insulation/insulation/gas (or vacuum). This work proposes a strategy for suppressing surface discharges at TJs through metal surface modification.

Förderung

  • National Science and Technology Major Project
  • National Natural Science Foundation of China
  • State Key Laboratory of Electrical Insulation and Power Equipment

Zitieren

APA

Lv, Z., Wu, Z., Li, B., Song, J., Wu, K., & Cheng, Y. (2026). Microarc oxidation layer on aluminum surface significantly suppresses partial discharge at triple junction point on insulation surface. Applied Physics Letters, 128(10). https://doi.org/10.1063/5.0310808

Vancouver

Lv Z, Wu Z, Li B, Song J, Wu K, Cheng Y. Microarc oxidation layer on aluminum surface significantly suppresses partial discharge at triple junction point on insulation surface. Applied Physics Letters. 2026;128(10). doi:10.1063/5.0310808

BibTeX
@article{Lv2026,
  author = {Lv, Zepeng and Wu, Zhenyu and Li, Bo and Song, Jianhong and Wu, Kai and Cheng, Yonghong},
  title = {Microarc oxidation layer on aluminum surface significantly suppresses partial discharge at triple junction point on insulation surface},
  journal = {Applied Physics Letters},
  year = {2026},
  volume = {128},
  number = {10},
  doi = {10.1063/5.0310808}
}
Kostenlos starten →