EUVIMEDEUVIMED entdecken
Crossref

Atomic force microscopy (AFM) tip metrology and inspection by knife edge diffractometry

Kuan Lu iD, Pengfei Lin iD, Hyeonho Cho iD, Sunghan Kim iD, Jiyong Park, ChaBum Lee iD

Review of Scientific Instruments · 01.04.2026 · 97 (4)

DOI: 10.1063/5.0309841 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Review of Scientific Instruments, online erschienen am 14.04.2026. Verfasst von Kuan Lu und 5 weiteren Autor:innen. Beteiligte Einrichtung: J. Mike Walker '66 Department of Mechanical Engineering, Texas A&M University, 3123 TAMU, College Station, Texas 77843-3123, USA. Die Arbeit nennt 23 Literaturangaben. Gefördert von: Korea Institute of Industrial Technology, National Research Foundation of Korea.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents a novel method for Atomic Force Microscopy (AFM) tip feature characterization, integrating with knife-edge interferometry-based experiments and Rayleigh–Sommerfeld diffraction theory-based mathematical modeling. The proposed approach provides a non-destructive and efficient method to monitor AFM tip wear by relating the measured fringe features to changes in radius and roughness. To generate controlled tip wear, a two-stage etching process was conducted, revealing notable changes in fringe patterns that correspond to an increased wear extent. Fringe pattern characteristics, such as the spacing between fringe orders and the entropy of vertical components, exhibited systematic changes as tip sharpness decreased. Quantitative analysis using structural similarity index measure, similarity index, and mean squared error further provided quantitative indicators of the tip geometric and roughness conditions. The results were validated by Scanning Electron Microscopy and corresponding AFM imaging. The successful implementation of the proposed method provides a non-destructive and efficient way to monitor tip wear by relating measured fringe features to simulated patterns, yielding a rapid quantitative wearing extent evaluation.

Autor:innen und Institutionen

  • J. Mike Walker '66 Department of Mechanical Engineering, Texas A&M University, 3123 TAMU, College Station, Texas 77843-3123, USA.
  • School of Mechanical Engineering, Chung-Ang University, Dongjak-gu, Seoul 06974, South Korea.
  • Korea Institute of Industrial Technology, 156 Gaebeol-ro, Yeonsu-gu, Incheon 21999, South Korea.
  • University of Science and Technology, 156 Gaebeol-ro, Yeonsu-gu, Incheon 21999, South Korea.

ORCID-Profile: Kuan Lu, Pengfei Lin, Hyeonho Cho, Sunghan Kim, ChaBum Lee

Förderung

  • Korea Institute of Industrial Technology
  • National Research Foundation of Korea

Zitieren

APA

Lu, K., Lin, P., Cho, H., Kim, S., Park, J., & Lee, C. (2026). Atomic force microscopy (AFM) tip metrology and inspection by knife edge diffractometry. Review of Scientific Instruments, 97(4). https://doi.org/10.1063/5.0309841

Vancouver

Lu K, Lin P, Cho H, Kim S, Park J, Lee C. Atomic force microscopy (AFM) tip metrology and inspection by knife edge diffractometry. Review of Scientific Instruments. 2026;97(4). doi:10.1063/5.0309841

BibTeX
@article{Lu2026,
  author = {Lu, Kuan and Lin, Pengfei and Cho, Hyeonho and Kim, Sunghan and Park, Jiyong and Lee, ChaBum},
  title = {Atomic force microscopy (AFM) tip metrology and inspection by knife edge diffractometry},
  journal = {Review of Scientific Instruments},
  year = {2026},
  volume = {97},
  number = {4},
  doi = {10.1063/5.0309841}
}
Kostenlos starten →