Development and characteristics of a fast gas valve for plasma-jet-driven magneto-inertial Fusion (PJMIF)
Review of Scientific Instruments · 01.03.2026 · 97 (3)
DOI: 10.1063/5.0304191 ↗Kurz gefasst
Fachartikel in der Zeitschrift Review of Scientific Instruments, online erschienen am 03.03.2026. Verfasst von Yanbin Liu und 6 weiteren Autor:innen. Beteiligte Einrichtung: Center for Ultimate Energy(CUE), ShanghaiTech University, Shanghai 201210, China. Die Arbeit nennt 19 Literaturangaben. Gefördert von: Project Supported by the Major National Science and Technology Infrastructure.
Abstract (Originalsprache)
To provide rapid gas injection for the plasma gun developed at the CUE of ShanghaiTech University, a new fast gas valve activated by eddy currents has been designed and tested on an experimental facility. A 7075 aluminum flyer plate is used to control the gas injection process. A saucer spring is designed to provide pre-compression force and back force on the flyer plate. Four displacement sensors are installed vertically to the flyer plate to measure distances at four equally distributed points. A capacitance diaphragm gauge is used to measure pressure changes in the vacuum chamber. The main characteristics of the fast gas valve are as follows: (1) the open–close time (the opening to complete closure time) is less than 230 μs, with a minimum value of 102 μs; (2) a saucer spring is designed to provide pre-compression force on the flyer plate, which demonstrates better performance than conventional spiral springs; (3) the gas mass dispensed by the fast gas valve is highly stable, with an average variation of less than 1%; (4) the maximum variation in displacements at the four measuring points on the flyer plate is less than 7%. The fast gas valve has been tested with argon gas on the plasma gun and has shown good performance.
Autor:innen und Institutionen
- Center for Ultimate Energy(CUE), ShanghaiTech University, Shanghai 201210, China.
ORCID-Profile: Yanbin Liu, Yuantong Jing, Y C Francis Thio
Förderung
- Project Supported by the Major National Science and Technology Infrastructure
Zitieren
APA
Liu, Y., Jing, Y., Thio, Y. C. F., Zhang, W., Zhang, D., Yuan, D., & Zheng, X. (2026). Development and characteristics of a fast gas valve for plasma-jet-driven magneto-inertial Fusion (PJMIF). Review of Scientific Instruments, 97(3). https://doi.org/10.1063/5.0304191
Vancouver
Liu Y, Jing Y, Thio YCF, Zhang W, Zhang D, Yuan D, et al. Development and characteristics of a fast gas valve for plasma-jet-driven magneto-inertial Fusion (PJMIF). Review of Scientific Instruments. 2026;97(3). doi:10.1063/5.0304191
BibTeX
@article{Liu2026,
author = {Liu, Yanbin and Jing, Yuantong and Thio, Y C Francis and Zhang, Wenyan and Zhang, Deyu and Yuan, Dongfang and Zheng, Xiaoming},
title = {Development and characteristics of a fast gas valve for plasma-jet-driven magneto-inertial Fusion (PJMIF)},
journal = {Review of Scientific Instruments},
year = {2026},
volume = {97},
number = {3},
doi = {10.1063/5.0304191}
}
EUVIMED