EUVIMEDEUVIMED entdecken
Crossref

Generation of non-diffractive terahertz Bessel beams using 3D printed spiral zone plates

Kevin K. Mutai, Chloe Stults, Zhaoji Fang, Daniel M. Mittleman

Applied Physics Letters · 23.10.2025 · 127 (17)

DOI: 10.1063/5.0302852 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Physics Letters, online erschienen am 28.10.2025. Verfasst von Kevin K. Mutai und 3 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 25 Literaturangaben. Gefördert von: National Science Foundation, Air Force Office of Scientific Research.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Due to their unique non-diffracting properties, Bessel beams have been studied across microwave to optical frequency regimes. Although several schemes for generating Bessel beams at microwave and terahertz (THz) frequencies have been demonstrated, these works have mainly focused on symmetric Bessel beams with little attention being given to asymmetric forms. In addition, existing methods are often technically involved, bulky, and costly. To address the gap in the generation of asymmetric beams and the identified challenges with contemporary generation schemes, we show that it is possible to produce both asymmetric and symmetric Bessel beams in a relatively simple and cost-effective manner using a planar Archimedean spiral zone plate. We fabricate this device using 3D printing and use it as a Bessel beam launcher operating at 0.2 THz. The zone plate generates an asymmetric Bessel beam close to the aperture through superposition of Bessel modes. As the axial distance is increased, the beam evolves into a symmetric Bessel beam.

Förderung

  • National Science Foundation
  • Air Force Office of Scientific Research

Zitieren

APA

Mutai, K. K., Stults, C., Fang, Z., & Mittleman, D. M. (2025). Generation of non-diffractive terahertz Bessel beams using 3D printed spiral zone plates. Applied Physics Letters, 127(17). https://doi.org/10.1063/5.0302852

Vancouver

Mutai KK, Stults C, Fang Z, Mittleman DM. Generation of non-diffractive terahertz Bessel beams using 3D printed spiral zone plates. Applied Physics Letters. 2025;127(17). doi:10.1063/5.0302852

BibTeX
@article{Mutai2025,
  author = {Mutai, Kevin K. and Stults, Chloe and Fang, Zhaoji and Mittleman, Daniel M.},
  title = {Generation of non-diffractive terahertz Bessel beams using 3D printed spiral zone plates},
  journal = {Applied Physics Letters},
  year = {2025},
  volume = {127},
  number = {17},
  doi = {10.1063/5.0302852}
}
Kostenlos starten →