EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Kilovolt-class β-Ga2O3 field-plated Schottky barrier diodes with MOCVD-grown intentionally 1015 cm−3 doped drift layers

Carl Peterson, Chinmoy Nath Saha, Rachel Kahler, Yizheng Liu, Akhila Mattapalli, Saurav Roy, Sriram Krishnamoorthy

Journal of Applied Physics · 14.11.2025 · 138 (18)

DOI: 10.1063/5.0302735 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Physics, online erschienen am 14.11.2025. Verfasst von Carl Peterson und 6 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 73 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Coherent / II-VI Foundation, Advanced Research Projects Agency - Energy.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

We report on the growth optimization of intentionally low-doped (1015 cm−3) high-quality beta-gallium oxide (β-Ga2O3) drift layers of up to 10 μm thick via metalorganic chemical vapor deposition (MOCVD) and the fabrication of kilovolt-class field-plated Schottky barrier diodes on these thick drift layers. Homoepitaxial growth was performed on (010) β-Ga2O3 substrates using trimethylgallium as the Ga precursor. Growth parameters were systematically optimized to determine the best conditions for high-quality thick growths with the given reactor geometry. Chamber pressure was found to improve the growth rate, mobility, and roughness of the samples. Growth rates of up to 7.2 μm/h, thicknesses of up to 10 μm, Hall mobilities of up to 176 cm2/Vs, RMS roughness down to 5.45 nm, UID concentrations as low as 2 × 1015 cm−3, and controllable intentional doping down to 3 × 1015 cm−3 were achieved. Field-plated Schottky barrier diodes (FP-SBDs) were fabricated on a 6.5 × 1015 cm−3 intentionally doped 10 μm thick film to determine the electrical performance of the MOCVD-grown material. The FP-SBD was found to have a current density of >100 A/cm2 at 3 V forward bias with a specific differential on resistance (Ron,sp) of 16.22 mΩ cm2 and a turn-on voltage of 1 V. The diodes were found to have high-quality anode metal/semiconductor interfaces with an ideality factor of 1.04, close to unity. Diodes had a maximum breakdown voltage of 1.50 kV, leading to a punch-through maximum field of 2.04 MV/cm under the anode metal, which is a state-of-the-art result for SBDs on MOCVD-grown (010) drift layers.

Förderung

  • Coherent / II-VI Foundation
  • Advanced Research Projects Agency - Energy

Zitieren

APA

Peterson, C., Saha, C. N., Kahler, R., Liu, Y., Mattapalli, A., Roy, S., & Krishnamoorthy, S. (2025). Kilovolt-class β-Ga2O3 field-plated Schottky barrier diodes with MOCVD-grown intentionally 1015 cm−3 doped drift layers. Journal of Applied Physics, 138(18). https://doi.org/10.1063/5.0302735

Vancouver

Peterson C, Saha CN, Kahler R, Liu Y, Mattapalli A, Roy S, et al. Kilovolt-class β-Ga2O3 field-plated Schottky barrier diodes with MOCVD-grown intentionally 1015 cm−3 doped drift layers. Journal of Applied Physics. 2025;138(18). doi:10.1063/5.0302735

BibTeX
@article{Peterson2025,
  author = {Peterson, Carl and Saha, Chinmoy Nath and Kahler, Rachel and Liu, Yizheng and Mattapalli, Akhila and Roy, Saurav and Krishnamoorthy, Sriram},
  title = {Kilovolt-class β-Ga2O3 field-plated Schottky barrier diodes with MOCVD-grown intentionally 1015 cm−3 doped drift layers},
  journal = {Journal of Applied Physics},
  year = {2025},
  volume = {138},
  number = {18},
  doi = {10.1063/5.0302735}
}
Kostenlos starten →