EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Modulating surface acoustic wave generation through superconductivity

Andrew Christy, Yuzan Xiong, Rui Sun, Yi Li, Kenneth O. Chua, Andrew H. Comstock, Junming Wu, Sidong Lei, Frank Tsui, Megan N. Jackson, Dali Sun, Valentine Novosad und 2 weitere

APL Materials · 01.03.2026 · 14 (3)

DOI: 10.1063/5.0302514 ↗

Kurz gefasst

Fachartikel in der Zeitschrift APL Materials, online erschienen am 17.03.2026. Verfasst von Andrew Christy und 13 weiteren Autor:innen. Die Arbeit nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Foundation, U.S. Department of Energy.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Surface acoustic waves (SAWs), with their five orders-of-magnitude slower propagation velocity, allow for considerably shorter wavelengths at the same frequency compared to electromagnetic waves. The short wavelengths allow for device miniaturization and on-chip integration. The generic design of these devices involves piezoelectric substrates with comb-like arrays of Al or Au electrodes known as interdigitated transducers (IDTs) deposited on the surface. However, Al and Au both have shortcomings at the cryogenic temperatures required for quantum applications, namely, the formation of two-level systems and the lack of superconductivity perpetuating Ohmic losses, respectively. In this work, SAWs are generated in the high-MHz to low-GHz range using niobium nitride (NbN) interdigitated transducers and Bragg reflectors. We demonstrate the fabrication of acoustic devices through photolithography and reactive ion etching. The sharp transition between superconducting and normal states and the corresponding change in SAW transmission allows for fine control of the “on” (superconducting) and “off” (normal) states of NbN, with a ΔT = 1 K separating the transmission minimum and maximum. We demonstrate a 16× difference in transmission between the “on” and “off” states of the device. The SAW transmission behavior mirrors the change in resistance of NbN at its Tc. These findings open up new possibilities for the integration of NbN SAW resonators into existing quantum architectures based on NbN and a method for adjusting transmission properties independent of applied voltage.

Förderung

  • National Science Foundation
  • U.S. Department of Energy

Zitieren

APA

Christy, A., Xiong, Y., Sun, R., Li, Y., Chua, K. O., Comstock, A. H., Wu, J., Lei, S., Tsui, F., Jackson, M. N., Sun, D., Novosad, V., Cahoon, J. F., & Zhang, W. (2026). Modulating surface acoustic wave generation through superconductivity. APL Materials, 14(3). https://doi.org/10.1063/5.0302514

Vancouver

Christy A, Xiong Y, Sun R, Li Y, Chua KO, Comstock AH, et al. Modulating surface acoustic wave generation through superconductivity. APL Materials. 2026;14(3). doi:10.1063/5.0302514

BibTeX
@article{Christy2026,
  author = {Christy, Andrew and Xiong, Yuzan and Sun, Rui and Li, Yi and Chua, Kenneth O. and Comstock, Andrew H. and Wu, Junming and Lei, Sidong and Tsui, Frank and Jackson, Megan N. and Sun, Dali and Novosad, Valentine and Cahoon, James F. and Zhang, Wei},
  title = {Modulating surface acoustic wave generation through superconductivity},
  journal = {APL Materials},
  year = {2026},
  volume = {14},
  number = {3},
  doi = {10.1063/5.0302514}
}
Kostenlos starten →