Simplification and verification of methanol/biodiesel combustion chemical reaction kinetics mechanism
Journal of Renewable and Sustainable Energy · 01.07.2026 · 18 (4)
DOI: 10.1063/5.0301727 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Renewable and Sustainable Energy, online erschienen am 16.07.2026. Verfasst von Mingrui Wei und 4 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben.
Abstract (Originalsprache)
Against the backdrop of global fossil fuel shortages and the “dual carbon” goals, this study investigates the challenges associated with neat biodiesel combustion and methanol–biodiesel co-combustion, including incomplete combustion and elevated nitrogen oxide (NOx) emissions when using neat biodiesel, as well as low combustion efficiency and difficulties in controlling pollutant emissions during co-combustion. This study focuses on methanol–biodiesel dual direct injection engines and examines the influence of methanol injection strategies on combustion and emission characteristics. Based on the biodiesel surrogate model developed by the Lawrence Livermore National Laboratory, biodiesel is represented by a mixture of methyl decanoate, methyl 9-decenoate, and n-heptane at a molar ratio of 1:1:2. The coupled mechanism, which incorporates methanol chemistry, is reduced using the directed relation graph, directed relation graph with error propagation, and sensitivity analysis methods. The reduced mechanism was validated against data on ignition delay, laminar flame speed, and species concentration, as well as via three-dimensional (3D) simulations. Within the 3D simulation platform, the following parameters were investigated: a fixed biodiesel injection timing of −20°crank angle (CA) after top dead center (ATDC), a fixed methanol energy ratio of 20%, and a variable methanol injection timing ranging from −70 °CA ATDC to 10 °CA ATDC. The results demonstrate that delaying the methanol injection timing advances the phasing of the in-cylinder pressure and heat release rate curves and shortens the ignition delay of biodiesel. When methanol is injected after biodiesel, hydrocarbon emissions, carbon monoxide emissions, and soot formation are significantly reduced. Although NOx emissions increase slightly, superior overall pollutant control performance is achieved. This study provides theoretical support for energy savings and emission reduction in methanol–biodiesel dual direct injection engines.
Zitieren
APA
Wei, M., Zou, X., Liu, J., Jia, Y., & Xia, Y. (2026). Simplification and verification of methanol/biodiesel combustion chemical reaction kinetics mechanism. Journal of Renewable and Sustainable Energy, 18(4). https://doi.org/10.1063/5.0301727
Vancouver
Wei M, Zou X, Liu J, Jia Y, Xia Y. Simplification and verification of methanol/biodiesel combustion chemical reaction kinetics mechanism. Journal of Renewable and Sustainable Energy. 2026;18(4). doi:10.1063/5.0301727
BibTeX
@article{Wei2026,
author = {Wei, Mingrui and Zou, Xinchao and Liu, Jinping and Jia, YuZhen and Xia, Yina},
title = {Simplification and verification of methanol/biodiesel combustion chemical reaction kinetics mechanism},
journal = {Journal of Renewable and Sustainable Energy},
year = {2026},
volume = {18},
number = {4},
doi = {10.1063/5.0301727}
}
EUVIMED