EUVIMEDEUVIMED entdecken
Crossref

Automated rapid cooling of high-temperature vacuum furnaces for high throughput neutron experimentation

Daksh Adhikari iD, Dante Quirinale iD, Patryk Radyjowski iD, Zechariah Thurman iD, Dunji Yu iD, Yan Chen iD, Ke An iD, Rebecca Mills iD, David Carlson iD, Reese Davis iD, Chien-Hua Chen iD

Review of Scientific Instruments · 01.06.2026 · 97 (6)

DOI: 10.1063/5.0299443 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Review of Scientific Instruments, online erschienen am 12.06.2026. Verfasst von Daksh Adhikari und 10 weiteren Autor:innen. Beteiligte Einrichtung: Georgia Institute of Technology, Atlanta, Georgia 30332, USA. Die Arbeit nennt 23 Literaturangaben. Gefördert von: Small Business Innovation Research.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Experiments utilizing neutrons to characterize material microstructures and properties are regularly performed at neutron beamline facilities at temperatures up to 1500 °C and above. In the standard blue series top-loading furnace, the post-experiment cooldown relying purely on radiation cooling can take 2–3× longer than the test itself, leading to a significant loss of neutron beam time and low experimental throughput. Here, we present an automated rapid cooling technique that reduces the cooldown time for a high-thermal-mass sample from 500 to 100 °C by a factor of over 20 without significant impact on the furnace components. The cooling system has been extensively tested at the SNS facility at ORNL and demonstrated under an in situ neutron diffraction experiment at the VULCAN beamline. The system demonstrates rapid in situ cooling from 1500 to 100 °C in <12 min, validated by neutron diffraction data, along with the ability to perform automated thermal heating and cooling cycles with minimal user interaction. The utilization of the new cooling capability identifies discrepancies between the thermocouple and neutron diffraction-derived temperature measurements during fast heating and cooling, indicating a need to account for temperature measurement accuracy limitations during experimental design planning. The cooling system shows the potential to significantly increase experimental throughput by reducing the post-experiment cooling time while also enabling controllable temperature profiles by automating key aspects of the heat-up and cool-down processes.

Autor:innen und Institutionen

  • Georgia Institute of Technology, Atlanta, Georgia 30332, USA.
  • Oak Ridge National Laboratory, Oak Ridge, Tennessee 37830, USA.
  • Advanced Cooling Technologies, Inc., Lancaster, Pennsylvania 17602, USA.

ORCID-Profile: Daksh Adhikari, Dante Quirinale, Patryk Radyjowski, Zechariah Thurman, Dunji Yu, Yan Chen, Ke An, Rebecca Mills, David Carlson, Reese Davis, Chien-Hua Chen

Förderung

  • Small Business Innovation Research

Zitieren

APA

Adhikari, D., Quirinale, D., Radyjowski, P., Thurman, Z., Yu, D., Chen, Y., An, K., Mills, R., Carlson, D., Davis, R., & Chen, C. H. (2026). Automated rapid cooling of high-temperature vacuum furnaces for high throughput neutron experimentation. Review of Scientific Instruments, 97(6). https://doi.org/10.1063/5.0299443

Vancouver

Adhikari D, Quirinale D, Radyjowski P, Thurman Z, Yu D, Chen Y, et al. Automated rapid cooling of high-temperature vacuum furnaces for high throughput neutron experimentation. Review of Scientific Instruments. 2026;97(6). doi:10.1063/5.0299443

BibTeX
@article{Adhikari2026,
  author = {Adhikari, Daksh and Quirinale, Dante and Radyjowski, Patryk and Thurman, Zechariah and Yu, Dunji and Chen, Yan and An, Ke and Mills, Rebecca and Carlson, David and Davis, Reese and Chen, Chien-Hua},
  title = {Automated rapid cooling of high-temperature vacuum furnaces for high throughput neutron experimentation},
  journal = {Review of Scientific Instruments},
  year = {2026},
  volume = {97},
  number = {6},
  doi = {10.1063/5.0299443}
}
Kostenlos starten →