Numerical investigation on the transient performance of solid–gas hybrid rocket motors during the starting/stopping helium injection process
Physics of Fluids · 01.09.2025 · 37 (9)
DOI: 10.1063/5.0295188 ↗Kurz gefasst
Fachartikel in der Zeitschrift Physics of Fluids, online erschienen am 22.09.2025. Verfasst von Chengke Li und 3 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 31 Literaturangaben. Gefördert von: Natural Science Foundation of Heilongjiang Province, Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
To investigate the evolution characteristics of motor performance during starting/stopping helium injection, a transient numerical simulation of the solid–gas hybrid rocket motor is conducted using the propellant combustion model. Results show that during the starting helium injection process, large-scale vortex rings caused by the shear effect of helium and combustion gas appear at the head of the high-velocity helium jet, and the growth and fragmentation behaviors of vortex rings promote the mixing of helium and combustion gas. Thus, a shorter regulation time of helium injection strengthens the initial momentum of vortex rings and achieves a higher mixing degree. In this condition, helium fills the recirculation zone of the post-combustion chamber, making the flow field of a motor reach a stable operation state. Finally, within 200 ms after the helium mass flow rate reaches 1 kg/s, the thrust and specific impulse are increased by 38.3% and 13.8%, respectively, while the nozzle exit temperature is decreased by 57%. However, when the initial momentum of the vortex ring is relatively small, the mixing degree is poor in the post-combustion chamber. Subsequently, periodic vortex shedding causes periodic fluctuations in the mixing degree in the nozzle, resulting in periodic oscillations with an amplitude of approximately 1% in motor performance. During the stopping helium injection process, within 200 ms after the helium mass flow rate is regulated to 0 kg/s, the motor thrust and specific impulse gradually recover to a level comparable to that observed before helium injection, and a shorter regulation time results in a faster variation in motor performance.
Förderung
- Natural Science Foundation of Heilongjiang Province
- Fundamental Research Funds for the Central Universities
Zitieren
APA
Li, C., Yang, Z., Wang, G., & Yang, H. (2025). Numerical investigation on the transient performance of solid–gas hybrid rocket motors during the starting/stopping helium injection process. Physics of Fluids, 37(9). https://doi.org/10.1063/5.0295188
Vancouver
Li C, Yang Z, Wang G, Yang H. Numerical investigation on the transient performance of solid–gas hybrid rocket motors during the starting/stopping helium injection process. Physics of Fluids. 2025;37(9). doi:10.1063/5.0295188
BibTeX
@article{Li2025,
author = {Li, Chengke and Yang, Zenan and Wang, Ge and Yang, Haiwei},
title = {Numerical investigation on the transient performance of solid–gas hybrid rocket motors during the starting/stopping helium injection process},
journal = {Physics of Fluids},
year = {2025},
volume = {37},
number = {9},
doi = {10.1063/5.0295188}
}
EUVIMED