Investigating directional flow-induced non-Fickian transport in rough-walled fractures with variable roughness characteristics
Physics of Fluids · 01.09.2025 · 37 (9)
DOI: 10.1063/5.0293887 ↗Kurz gefasst
Fachartikel in der Zeitschrift Physics of Fluids, online erschienen am 12.09.2025. Verfasst von Yingtao Hu und 5 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 51 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Zhejiang Provincial Natural Science Foundation of China.
Abstract (Originalsprache)
How the combined effects of flow direction and surface roughness parameters govern anisotropic flow and non-Fickian transport have not yet been fully understood. In this study, we aim to investigate the directional flow-induced non-Fickian transport mechanism in rough-walled fractures. Flow direction is systematically varied in 15° increments from 0° to 345°, yielding 24 orientations for each fracture model. To examine its interaction with fracture roughness, the fluid flow and solute transport simulations were performed in OpenGeoSys-6 across combinations of Hurst exponent (H = 0.4–0.8) and roughness amplitude (σ2 = 0.1–0.3). The results show that flow direction strongly controls solute transport in rough-walled fractures. In the representative case (H = 0.4, σ2 = 0.3), preferential high-velocity channels and fingered plumes form along specific orientations, while other directions produce dispersed flow. Breakthrough curve analyses across 24 directions yield mean deviations of 3.203% and standard deviations of 1.811%, indicating substantial variability. Arrival time (tarrival) and saturation time (tsaturation) reveal that rapid breakthrough coincides with prolonged saturation, whereas delayed arrival yields shorter saturation and more uniform distribution. The combined effects of H and σ2 further regulate anisotropy: at H = 0.4, the mean tarrival is 0.287 and tsaturation is 2.612, exhibiting the largest directional variability with coefficients of variation (COV) of 0.243 and 0.118, respectively; as H increases to 0.8, tarrival increases to 0.316, tsaturation decreases to 1.993, and corresponding COV drops to 0.006/0.004, indicating smoother fractures promote more consistent transport behavior with reduced directional sensitivity. Besides, fractures with low H and high σ2 exhibit broad distributions and significant directional asymmetry, while those with high H and low σ2 show nearly isotropic transport. These findings emphasize the strong coupling between flow direction and fracture roughness, and demonstrate that non-Fickian transport is not solely a result of geometric disorder but also a direction–dependent phenomenon. The results underline the importance of incorporating directional heterogeneity into predictive transport models for fractured media.
Förderung
- National Natural Science Foundation of China
- Zhejiang Provincial Natural Science Foundation of China
Zitieren
APA
Hu, Y., Hu, Q., Xue, H., Xu, Q., Huang, Y., & Xu, W. (2025). Investigating directional flow-induced non-Fickian transport in rough-walled fractures with variable roughness characteristics. Physics of Fluids, 37(9). https://doi.org/10.1063/5.0293887
Vancouver
Hu Y, Hu Q, Xue H, Xu Q, Huang Y, Xu W. Investigating directional flow-induced non-Fickian transport in rough-walled fractures with variable roughness characteristics. Physics of Fluids. 2025;37(9). doi:10.1063/5.0293887
BibTeX
@article{Hu2025,
author = {Hu, Yingtao and Hu, Qingnian and Xue, Haoyu and Xu, Qiang and Huang, Yong and Xu, Wenjie},
title = {Investigating directional flow-induced non-Fickian transport in rough-walled fractures with variable roughness characteristics},
journal = {Physics of Fluids},
year = {2025},
volume = {37},
number = {9},
doi = {10.1063/5.0293887}
}
EUVIMED