EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Atomic understanding of Kelvin–Helmholtz instability at single-crystal copper interface with an initial corrugated disturbance under different tangential velocities

Jianhao Shi, Xi Wang, Xiaomian Hu, Zihui Wu, Hao Pan

Matter and Radiation at Extremes · 01.05.2026 · 11 (3)

DOI: 10.1063/5.0290672 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Matter and Radiation at Extremes, online erschienen am 25.02.2026. Verfasst von Jianhao Shi und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The evolutionary mechanisms of Kelvin–Helmholtz instability at single-crystal copper–copper interfaces with initial sinusoidal perturbation under different tangential velocity discontinuities (0.5, 1.0, 2.0, and 3.0 km/s) are investigated through molecular dynamics simulations. Distinct characteristics of stable and unstable interface morphologies are identified. The interface contact length, rather than the perturbation amplitude, extracted by an edge detection method, is selected as an appropriate physical quantity to indicate the state of the interface. The interface is stable for a tangential velocity discontinuity of 0.5 km/s, since the contact length remains essentially unchanged, but it is unstable for the other three velocities, since the contact length increases continuously. The contact lengths of unstable interfaces exhibit distinctly different nonlinear growth patterns. The microstructural evolutions for stable and unstable interfaces are also revealed. Sparse distributions of microstructures, such as dislocations and stacking faults, are observed in a stable interface, whereas extensive propagation, indicating large areas of plastic deformation, is found in unstable interfaces. Furthermore, a large number of metastable phase atoms emerge during plastic deformation, and an amorphous belt whose thickness grows as the velocity increases is formed near unstable interfaces. A thicker amorphous belt corresponds to greater plastic work, which produces a wider high-temperature belt near the interface. It also leads to the formation of a thicker shear belt with a high gradient velocity profile, creating a dynamic condition to promote the instability and thus distort the interface.

Zitieren

APA

Shi, J., Wang, X., Hu, X., Wu, Z., & Pan, H. (2026). Atomic understanding of Kelvin–Helmholtz instability at single-crystal copper interface with an initial corrugated disturbance under different tangential velocities. Matter and Radiation at Extremes, 11(3). https://doi.org/10.1063/5.0290672

Vancouver

Shi J, Wang X, Hu X, Wu Z, Pan H. Atomic understanding of Kelvin–Helmholtz instability at single-crystal copper interface with an initial corrugated disturbance under different tangential velocities. Matter and Radiation at Extremes. 2026;11(3). doi:10.1063/5.0290672

BibTeX
@article{Shi2026,
  author = {Shi, Jianhao and Wang, Xi and Hu, Xiaomian and Wu, Zihui and Pan, Hao},
  title = {Atomic understanding of Kelvin–Helmholtz instability at single-crystal copper interface with an initial corrugated disturbance under different tangential velocities},
  journal = {Matter and Radiation at Extremes},
  year = {2026},
  volume = {11},
  number = {3},
  doi = {10.1063/5.0290672}
}
Kostenlos starten →