EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Simulation and optimization of hydraulic fracturing in deep coal-rock reservoirs

Xiaoyong Wen, Qian Liu, Yi Zhang, Qianyun Zhao, Lishijia Han, Jinghong Hu

AIP Advances · 01.03.2026 · 16 (3)

DOI: 10.1063/5.0286544 ↗

Kurz gefasst

Fachartikel in der Zeitschrift AIP Advances, online erschienen am 12.03.2026. Verfasst von Xiaoyong Wen und 5 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Scientific Research Innovation Capability Support Project for Young Faculty.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Deep coalbed methane (CBM) reservoirs represent a promising yet technically challenging frontier in unconventional gas development, owing to their ultra-low permeability, pronounced heterogeneity, and complex in situ stress conditions. However, conventional hydraulic fracturing designs developed for shallow seams often fail to deliver satisfactory stimulation performance in deeper formations. To overcome these limitations, this study proposes an integrated workflow that combines high-resolution 3 dimensions geological modeling, numerical simulation, and statistical optimization to enhance stimulation effectiveness in deep CBM reservoirs. A high-resolution geological and fracture model of Block M was constructed to accurately represent spatial heterogeneity and natural fracture distribution. Based on this model, a series of numerical simulations were conducted under varying operational conditions, and response surface methodology was employed to evaluate the effects of key fracturing parameters on the stimulated reservoir volume (SRV).The results indicate that the optimized scheme enhances the effective SRV by 24.13% compared to the baseline design, while effectively maintaining fracture height containment. However, economic evaluation reveals that the scheme with the largest SRV does not correspond to the most economically optimal option. By comparing the SRV-maximized and economically optimal scenarios, a trade-off analysis was performed to identify a technically and economically balanced solution. Moreover, economic evaluation results confirmed the technical feasibility and cost-effectiveness of the proposed stimulation strategy under deep reservoir conditions. Overall, this work provides a scalable, data-driven approach to guide hydraulic fracturing optimization in deep CBM development, aligning geological constraints with engineering decisions.

Förderung

  • Scientific Research Innovation Capability Support Project for Young Faculty

Zitieren

APA

Wen, X., Liu, Q., Zhang, Y., Zhao, Q., Han, L., & Hu, J. (2026). Simulation and optimization of hydraulic fracturing in deep coal-rock reservoirs. AIP Advances, 16(3). https://doi.org/10.1063/5.0286544

Vancouver

Wen X, Liu Q, Zhang Y, Zhao Q, Han L, Hu J. Simulation and optimization of hydraulic fracturing in deep coal-rock reservoirs. AIP Advances. 2026;16(3). doi:10.1063/5.0286544

BibTeX
@article{Wen2026,
  author = {Wen, Xiaoyong and Liu, Qian and Zhang, Yi and Zhao, Qianyun and Han, Lishijia and Hu, Jinghong},
  title = {Simulation and optimization of hydraulic fracturing in deep coal-rock reservoirs},
  journal = {AIP Advances},
  year = {2026},
  volume = {16},
  number = {3},
  doi = {10.1063/5.0286544}
}
Kostenlos starten →