EUVIMEDEUVIMED entdecken
Crossref

Numerical study on aerodynamic noise reduction of bogies with cylindrical leading-edge disturbances

Longzhou Qi, Zhigang Yang, Hanlin Liu, Xinyuan Lu, Yubao Song

Physics of Fluids · 01.12.2025 · 37 (12)

DOI: 10.1063/5.0286232 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Physics of Fluids, online erschienen am 02.12.2025. Verfasst von Longzhou Qi und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 41 Literaturangaben. Gefördert von: the Resarch Fund of the key laboratory for aerodynamic noise control, science and technoloy research program of china national railway group.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study proposes a passive noise reduction method using cylindrical leading-edge perturbation structures in the bogie region of high-speed trains. Large Eddy Simulations combined with the Ffowcs Williams–Hawkings acoustic analogy were performed on a 1:8 scale simplified bogie model at 400 km/h to assess the effectiveness of this approach. Cylindrical leading-edge structures with diameters of 0.5δ, 0.625δ, 0.75δ, and 0.875δ (δ: local boundary layer thickness) were assessed for their impact on flow disturbances, Spectral Proper Orthogonal Decomposition modes, dipole source power, and far-field noise. The 0.875δ cylindrical leading-edge structure achieved the greatest noise reduction, lowering far-field Overall Sound Pressure Level by up to 3.7 dB. This reduction is primarily due to the suppression of tonal peaks near 250 and 500 Hz. The 250 Hz tonal peak primarily originates from a large-scale recirculating feedback flow (L1) within the bogie cavity. The cylindrical leading-edge disturbance modifies the shear layer separation angle, reduces flow impingement on the rear cavity wall, and displaces the recirculation zone (L2) downward, thereby weakening the tonal feedback loop. The 500 Hz tonal peak arises from strong dipole sources observed near the front axle, bogie frame, and the lower surfaces of both front and rear wheels. The cylindrical leading-edge disturbance modifies the dominant flow modes, reducing their interaction with the axle and bogie frame and thereby disrupting flow-structure coupling. This results in a substantial reduction in noise energy, with small-scale feedback structures (S1 and S2) nearly eliminated and the intensity of S3 significantly reduced.

Förderung

  • the Resarch Fund of the key laboratory for aerodynamic noise control
  • science and technoloy research program of china national railway group

Zitieren

APA

Qi, L., Yang, Z., Liu, H., Lu, X., & Song, Y. (2025). Numerical study on aerodynamic noise reduction of bogies with cylindrical leading-edge disturbances. Physics of Fluids, 37(12). https://doi.org/10.1063/5.0286232

Vancouver

Qi L, Yang Z, Liu H, Lu X, Song Y. Numerical study on aerodynamic noise reduction of bogies with cylindrical leading-edge disturbances. Physics of Fluids. 2025;37(12). doi:10.1063/5.0286232

BibTeX
@article{Qi2025,
  author = {Qi, Longzhou and Yang, Zhigang and Liu, Hanlin and Lu, Xinyuan and Song, Yubao},
  title = {Numerical study on aerodynamic noise reduction of bogies with cylindrical leading-edge disturbances},
  journal = {Physics of Fluids},
  year = {2025},
  volume = {37},
  number = {12},
  doi = {10.1063/5.0286232}
}
Kostenlos starten →