Room temperature ferroelectricity and self-biased magnetoelectricity in SmFeO3 nanocomposite by 3D strain engineering
APL Electronic Devices · 01.09.2025 · 1 (3)
DOI: 10.1063/5.0279174 ↗Kurz gefasst
Fachartikel in der Zeitschrift APL Electronic Devices, online erschienen am 22.07.2025. Verfasst von Manisha Bansal und 6 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Royal Academy of Engineering, European Commission, Science Foundation Ireland.
Abstract (Originalsprache)
Tuning spin and charge degrees of freedom of complex oxide materials can enable significant advancements in future spintronics. In this study, by three dimensional strain engineering, we demonstrate room temperature ferroelectricity and magnetoelectricity in a vertically aligned nanocomposite thin film structure, composed of vertical nanopillars of SmFeO3 (SFO) embedded within the NiFeO4 (NFO) matrix. A three-dimensional tensile strain is induced in the SFO as a result of the unique film architecture. The tensile strain in SFO produces strong room temperature ferroelectric response instead of the normally very weak ferroelectricity of unstrained SFO, which is an improper ferroelectric. The induced ferroelectricity in SFO enables self-biased magnetoelectric coupling to be achieved between the two phases (magnetoelectric coupling coefficient ∼4 × 10−11 sm−1 at room temperature). The magnetoelectric coupling is facilitated by strain transfer across the vertical interfaces of the two phases. We additionally observe an exchange bias of ∼200 Oe (at 2 K) surviving up to the room temperature, indicating strongly coupled interfaces of SFO and NFO. These findings represent a step forward in future magnetoelectric RAM devices.
Förderung
- Royal Academy of Engineering
- European Commission
- Science Foundation Ireland
Zitieren
APA
Bansal, M., Keeney, L., Choudhury, A., Huang, J., Wang, H., MacManus-Driscoll, J. L., & Maity, T. (2025). Room temperature ferroelectricity and self-biased magnetoelectricity in SmFeO3 nanocomposite by 3D strain engineering. APL Electronic Devices, 1(3). https://doi.org/10.1063/5.0279174
Vancouver
Bansal M, Keeney L, Choudhury A, Huang J, Wang H, MacManus-Driscoll JL, et al. Room temperature ferroelectricity and self-biased magnetoelectricity in SmFeO3 nanocomposite by 3D strain engineering. APL Electronic Devices. 2025;1(3). doi:10.1063/5.0279174
BibTeX
@article{Bansal2025,
author = {Bansal, Manisha and Keeney, Lynette and Choudhury, Abhijeet and Huang, Jialong and Wang, Haiyan and MacManus-Driscoll, Judith L. and Maity, Tuhin},
title = {Room temperature ferroelectricity and self-biased magnetoelectricity in SmFeO3 nanocomposite by 3D strain engineering},
journal = {APL Electronic Devices},
year = {2025},
volume = {1},
number = {3},
doi = {10.1063/5.0279174}
}
EUVIMED