EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

A three-dimensional laser ray-tracing methodology for radiation-hydrodynamics simulations

Brian M. Haines, Lauren M. Green, Charles R. Ferenbaugh, Michael D. McKay

APL Computational Physics · 2025

DOI: 10.1063/5.0277784 ↗

Kurz gefasst

Fachartikel in der Zeitschrift APL Computational Physics, 2025. Verfasst von Brian M. Haines und 3 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: U.S. Department of Energy.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

We report on a methodology for performing laser ray-tracing in three spatial dimensions for radiation-hydrodynamics simulation codes. Our method, which is an extension of that developed in Haines et al., Comput. Fluids 201, 104478 (2020), utilizes an automatically generated separate mesh for the laser ray-tracing from the radiation-hydrodynamics mesh. This enables the laser mesh to be tailored to minimize ray noise with significantly fewer rays than would be required when the ray-tracing is performed on the radiation-hydrodynamics mesh, primarily by allowing the use of high-aspect-ratio cells that are not suitable for hydrodynamics solvers. For a planar target, we show that our method provides a ≈100× reduction in computational expense to achieve a fixed level of ray noise relative to ray-tracing directly on the radiation-hydrodynamics mesh. The relatively low ray requirement also enables efficient computation of cross-beam energy transfer. Each cell in the logically cubic laser mesh is a non-convex dodecahedron with triangular sides, and numerical integration of the ray trajectories and inverse bremsstrahlung is performed by mapping each cell to the unit cube. We will describe our methodology in detail as well as its implementation in the xRAGE radiation-hydrodynamics code, discuss performance, and present the results from applying the methodology to test problems with analytic solutions for laser ray-tracing through a quadratic density gradient with an analytic solution as well as for a laser-driven heat front. In 3D radiation-hydrodynamics simulations of laser-driven experiments performed on the National Ignition Facility, laser ray-tracing with our methodology uses less than 1% of total computational time while introducing acceptably low levels of ray noise.

Förderung

  • U.S. Department of Energy

Zitieren

APA

Haines, B. M., Green, L. M., Ferenbaugh, C. R., & McKay, M. D. (2025). A three-dimensional laser ray-tracing methodology for radiation-hydrodynamics simulations. APL Computational Physics. https://doi.org/10.1063/5.0277784

Vancouver

Haines BM, Green LM, Ferenbaugh CR, McKay MD. A three-dimensional laser ray-tracing methodology for radiation-hydrodynamics simulations. APL Computational Physics. 2025. doi:10.1063/5.0277784

BibTeX
@article{Haines2025,
  author = {Haines, Brian M. and Green, Lauren M. and Ferenbaugh, Charles R. and McKay, Michael D.},
  title = {A three-dimensional laser ray-tracing methodology for radiation-hydrodynamics simulations},
  journal = {APL Computational Physics},
  year = {2025},
  doi = {10.1063/5.0277784}
}
Kostenlos starten →