EUVIMEDEUVIMED entdecken
Crossref

A nanocalorimeter designed for use with high-resolution transmission electron microscopy

Izak McGieson iD, Shane Q Arlington iD, Lakshmi Ravi Narayan iD, William Osborn iD, Michael D Grapes iD, Timothy P Weihs iD, Melissa K Santala iD, David A LaVan iD, Feng Yi iD

Review of Scientific Instruments · 01.10.2025 · 96 (10)

DOI: 10.1063/5.0274608 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Review of Scientific Instruments, online erschienen am 15.10.2025. Verfasst von Izak McGieson und 8 weiteren Autor:innen. Beteiligte Einrichtung: Materials Measurement Science Division, Material Measurement Laboratory, National Institute of Standards and Technology, Gaithersburg, Maryland 20899…. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 26 Literaturangaben. Gefördert von: National Science Foundation, Department of Energy, CHIPS Metrology Program.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Nanocalorimetry is a thermal analysis technique utilizing microfabricated sensors capable of characterizing phase transformations and chemical reactions both isothermally or at fast heating and cooling rates when operated in a scanning mode. Here, a nanocalorimeter was designed to operate in a transmission electron microscope (TEM) holder compatible with TEMs with a narrow pole piece gap. The nanocalorimeters have an electrical connection design to enable in situ TEM observation during high-rate thermal measurements. Both 10 nm alumina and 20 nm silicon nitride membranes were realized as TEM observation windows, to allow for high resolution and high-speed imaging. For certain specimens, the nanocalorimeters may be fabricated with small perforations so the specimen may be imaged over vacuum without any support layer, as demonstrated for a 25 nm thick gold film. Elimination of the amorphous silicon nitride under the TEM observation region reduces the background signal. Preliminary measurements demonstrate the versatility of the nanocalorimeter for in situ TEM observation. Synchronizing nanocalorimetry with a high-frame-rate direct electron detector further extends the measurement capability to couple thermal analysis with the evolution of microstructure.

Autor:innen und Institutionen

  • Materials Measurement Science Division, Material Measurement Laboratory, National Institute of Standards and Technology, Gaithersburg, Maryland 20899, USA.
  • Department of Physics, Oregon State University, Corvallis, Oregon 97331, USA.
  • Department of Materials Science, Johns Hopkins University, Baltimore, Maryland 21218, USA.
  • Materials Science Program, Oregon State University, Corvallis, Oregon 97331, USA.
  • School of Mechanical, Industrial and Manufacturing Engineering, Oregon State University, Corvallis, Oregon 97331, USA.

ORCID-Profile: Izak McGieson, Shane Q Arlington, Lakshmi Ravi Narayan, William Osborn, Michael D Grapes, Timothy P Weihs, Melissa K Santala, David A LaVan, Feng Yi

Förderung

  • National Science Foundation
  • Department of Energy
  • CHIPS Metrology Program

Zitieren

APA

McGieson, I., Arlington, S. Q., Ravi Narayan, L., Osborn, W., Grapes, M. D., Weihs, T. P., Santala, M. K., LaVan, D. A., & Yi, F. (2025). A nanocalorimeter designed for use with high-resolution transmission electron microscopy. Review of Scientific Instruments, 96(10). https://doi.org/10.1063/5.0274608

Vancouver

McGieson I, Arlington SQ, Ravi Narayan L, Osborn W, Grapes MD, Weihs TP, et al. A nanocalorimeter designed for use with high-resolution transmission electron microscopy. Review of Scientific Instruments. 2025;96(10). doi:10.1063/5.0274608

BibTeX
@article{McGieson2025,
  author = {McGieson, Izak and Arlington, Shane Q and Ravi Narayan, Lakshmi and Osborn, William and Grapes, Michael D and Weihs, Timothy P and Santala, Melissa K and LaVan, David A and Yi, Feng},
  title = {A nanocalorimeter designed for use with high-resolution transmission electron microscopy},
  journal = {Review of Scientific Instruments},
  year = {2025},
  volume = {96},
  number = {10},
  doi = {10.1063/5.0274608}
}
Kostenlos starten →