Sputter epitaxy of ZnO–InN alloy films on sapphire substrates realized via 3D buffer layers and kinetically driven growth control
AIP Advances · 01.09.2025 · 15 (9)
DOI: 10.1063/5.0272318 ↗Kurz gefasst
Fachartikel in der Zeitschrift AIP Advances, online erschienen am 02.09.2025. Verfasst von Shotaro Hata und 7 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Japan Society for the Promotion of Science, Japan Science and Technology Agency, Tokyo Electron Ltd..
Abstract (Originalsprache)
We demonstrate epitaxial growth of high-quality (ZnO)0.9(InN)0.1 films (ZION films) on sapphire substrates using three-dimensional (3D) ZnO island buffer layers. These buffer layers play a crucial role in overcoming the 19% lattice mismatch between (ZnO)0.9(InN)0.1 and sapphire, providing lattice-relaxed nucleation sites with a well-aligned orientation and reducing the interfacial free energy between the film and underlying layer. The resulting (ZnO)0.9(InN)0.1 films exhibit excellent crystal quality, with a remarkably narrow full width at half maximum of 0.04° in the x-ray rocking curve of the 0002 reflection, surpassing films grown on lattice-matched, yet costly, bulk ZnO substrates. We find that superior crystal quality is achieved with a smaller substrate off-cut angle (θoff) and a higher buffer deposition rate (DRbuffer), A small θoff (≤0.4°) promotes the formation of nanoscale 3D islands by maintaining crystallographic terrace widths wider than the adatom migration length, thereby suppressing strained step-flow growth and enabling effective strain relaxation at the island surfaces. Meanwhile, a high DRbuffer (≥0.28 nm/s) increases the flux of sputtered atoms relative to their diffusivity on the substrate surface, facilitating the nucleation of finer 3D islands and further enhancing lattice strain relaxation. These results present a complementary perspective to conventional epitaxial growth approaches, which typically favor lower deposition rates and larger θoff to enhance step-flow growth. This 3D-ZnO buffer layer technique offers a kinetically driven pathway for high-quality epitaxy on lattice-mismatched substrates, not only advancing ZION-based optoelectronic and energy-harvesting applications but also providing a scalable method for other materials that lack cost-effective lattice-matched substrates.
Förderung
- Japan Society for the Promotion of Science
- Japan Science and Technology Agency
- Tokyo Electron Ltd.
Zitieren
APA
Hata, S., Nakano, Y., Narishige, R., Okumura, T., Kamataki, K., Koga, K., Shiratani, M., & Itagaki, N. (2025). Sputter epitaxy of ZnO–InN alloy films on sapphire substrates realized via 3D buffer layers and kinetically driven growth control. AIP Advances, 15(9). https://doi.org/10.1063/5.0272318
Vancouver
Hata S, Nakano Y, Narishige R, Okumura T, Kamataki K, Koga K, et al. Sputter epitaxy of ZnO–InN alloy films on sapphire substrates realized via 3D buffer layers and kinetically driven growth control. AIP Advances. 2025;15(9). doi:10.1063/5.0272318
BibTeX
@article{Hata2025,
author = {Hata, Shotaro and Nakano, Yutaro and Narishige, Ryota and Okumura, Takamasa and Kamataki, Kunihiro and Koga, Kazunori and Shiratani, Masaharu and Itagaki, Naho},
title = {Sputter epitaxy of ZnO–InN alloy films on sapphire substrates realized via 3D buffer layers and kinetically driven growth control},
journal = {AIP Advances},
year = {2025},
volume = {15},
number = {9},
doi = {10.1063/5.0272318}
}
EUVIMED