EUVIMEDEUVIMED entdecken
Crossref

Enhanced heat and mass transfer in a microchannel using separated circular bluff body and L-shaped flexible micro-beam

Enkai Hu, Dalei Jing

Physics of Fluids · 01.07.2025 · 37 (7)

DOI: 10.1063/5.0272305 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Physics of Fluids, online erschienen am 17.07.2025. Verfasst von Enkai Hu und 1 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 51 Literaturangaben. Gefördert von: Shanghai Magnolia Talent Program-Pujiang Project, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The asymmetric flexible vortex generator (FVG), consisting of an L-shaped flexible micro-beam attached to a circular bluff body, is an effective strategy for facilitating the vortex shedding, thereby enhancing the heat transfer and fluid mixing of microchannel flow at low Reynolds numbers. To further improve the heat and mass transfer performance, this paper proposes a modified design in which the circular bluff body and the L-shaped flexible micro-beam are separated and investigates the effects of this separation on the Nusselt number, outlet mixing efficiency, and pressure drop of the fluid flow inside a microchannel at three different circular diameter-based Reynolds numbers Red = 25, 50, and 100. The results demonstrate that the separated vortex generator facilitates the transition from laminar flow to vortex flow more effectively than the no-separation design. For the quantitative effects on the heat and mass transfer performance, the separation shows limited effect at Red = 25. However, at Red = 50 and 100, the separation between the circular bluff body and the L-shaped flexible micro-beam obviously enhances the Nusselt number and outlet mixing efficiency compared to those of the non-separated vortex generator, though with increased pressure loss. The maximum increases in the Nusselt number and outlet mixing efficiency reach 28.47% and 426.31%. This work provides a promising approach to design the asymmetric FVG through structural separation, enhancing heat transfer and fluid mixing of microchannel flow.

Förderung

  • Shanghai Magnolia Talent Program-Pujiang Project
  • National Natural Science Foundation of China

Zitieren

APA

Hu, E., & Jing, D. (2025). Enhanced heat and mass transfer in a microchannel using separated circular bluff body and L-shaped flexible micro-beam. Physics of Fluids, 37(7). https://doi.org/10.1063/5.0272305

Vancouver

Hu E, Jing D. Enhanced heat and mass transfer in a microchannel using separated circular bluff body and L-shaped flexible micro-beam. Physics of Fluids. 2025;37(7). doi:10.1063/5.0272305

BibTeX
@article{Hu2025,
  author = {Hu, Enkai and Jing, Dalei},
  title = {Enhanced heat and mass transfer in a microchannel using separated circular bluff body and L-shaped flexible micro-beam},
  journal = {Physics of Fluids},
  year = {2025},
  volume = {37},
  number = {7},
  doi = {10.1063/5.0272305}
}
Kostenlos starten →