EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Taylor limit studies for local helicity injection plasma startup

J. D. Weberski, M. W. Aslin, M. W. Bongard, J. A. Goetz, M. D. Nornberg, J. K. Peery, S. Redd, J. A. Reusch, C. Rodriguez Sanchez, C. E. Schaefer, A. C. Sontag, T. N. Tierney und 1 weitere

Physics of Plasmas · 01.06.2025 · 32 (6)

DOI: 10.1063/5.0261523 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Physics of Plasmas, online erschienen am 24.06.2025. Verfasst von J. D. Weberski und 12 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 64 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: U.S. Department of Energy, Office of Science, Office of Fusion Energy Sciences.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Solenoid-free tokamak startup techniques can simplify the design and reduce the cost of tokamak-based fusion energy systems. The newly commissioned Pegasus-III spherical tokamak provides a dedicated platform for developing a scalable solenoid-free startup approach. Local helicity injection (LHI) is one promising technique being developed on Pegasus-III, which uses compact edge current sources to drive open field line current Iinj that is redistributed via helicity-conserving instabilities to initiate tokamak plasmas. These instabilities relax the system toward a minimum energy state described by Taylor relaxation theory. This relaxation process imposes a global current limit for LHI plasmas, referred to as the Taylor limit ITL, which can dictate the plasma current Ip evolution. Experiments on Pegasus and Pegasus-III show that increasing this limit leads to more effective utilization of the available helicity input and higher Ip plasmas. Initial Pegasus-III experiments have verified the expected ITL∝IinjBT1/2 scaling holds for BT and Iinj up to 0.3 T on axis and 12 kA, respectively. Additionally, data from different injector arrays show that the width of the injector aperture directly alters ITL and can be leveraged for future injector design optimization. Throughout these scaling studies, discharges were overdriven at Ip=ITL by providing excess helicity input. Intermittent bursts of n=1 magnetic activity consistent with large-scale reconnection events occurred more often as the system was increasingly overdriven leading to a flattening of the λ=μ0J∥/B profile, where J∥ is the parallel current density.

Förderung

  • U.S. Department of Energy, Office of Science, Office of Fusion Energy Sciences

Zitieren

APA

Weberski, J. D., Aslin, M. W., Bongard, M. W., Goetz, J. A., Nornberg, M. D., Peery, J. K., Redd, S., Reusch, J. A., Sanchez, C. R., Schaefer, C. E., Sontag, A. C., Tierney, T. N., & Diem, S. J. (2025). Taylor limit studies for local helicity injection plasma startup. Physics of Plasmas, 32(6). https://doi.org/10.1063/5.0261523

Vancouver

Weberski JD, Aslin MW, Bongard MW, Goetz JA, Nornberg MD, Peery JK, et al. Taylor limit studies for local helicity injection plasma startup. Physics of Plasmas. 2025;32(6). doi:10.1063/5.0261523

BibTeX
@article{Weberski2025,
  author = {Weberski, J. D. and Aslin, M. W. and Bongard, M. W. and Goetz, J. A. and Nornberg, M. D. and Peery, J. K. and Redd, S. and Reusch, J. A. and Sanchez, C. Rodriguez and Schaefer, C. E. and Sontag, A. C. and Tierney, T. N. and Diem, S. J.},
  title = {Taylor limit studies for local helicity injection plasma startup},
  journal = {Physics of Plasmas},
  year = {2025},
  volume = {32},
  number = {6},
  doi = {10.1063/5.0261523}
}
Kostenlos starten →