Numerical investigation of Taylor–Couette flow in a grooved configuration
Physics of Fluids · 01.03.2025 · 37 (3)
DOI: 10.1063/5.0257292 ↗Kurz gefasst
Fachartikel in der Zeitschrift Physics of Fluids, online erschienen am 27.03.2025. Verfasst von Wulong Hu und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 22 Literaturangaben. Gefördert von: National Key Research and Development Program of China.
Abstract (Originalsprache)
Taylor–Couette (T-C) flow is ubiquitous in engineering and industry. To better understand T-C flow, this study investigates how groove structures affect T-C flow by using large eddy simulation to numerically simulate the flow between concentric cylinders with various groove structures on the outer cylinder. The analysis focuses on variations in flow fields, vortex structures, and torque under different groove configurations. The basic model used in this study simulates a length of 360 mm, with inner and outer radii of 32 and 40 mm, respectively. Groove structures are introduced on the outer cylinder in axial, helical, and circumferential distributions, each with a length and width of 5 mm. Comparative analyses of the computational results of four models reveal that grooved models produce less torque on the inner and outer surfaces than the smooth-surface model. When grooves are distributed axially and helically, vortex depletion occurs within the gap, reducing the outer surface torque by 4.36% and 4.21%, respectively, compared with the smooth configuration. For the circumferentially grooved model, two flow states are observed: when the grooves align with the center of the vortex in the gap, the torque on the inner (outer) wall decreases (increases), resulting in a remarkable 15.36% reduction in torque difference between the inner and outer surfaces. These findings reveal the differential impacts of various groove structures on surface torque, offering insights into the optimization of surface structures in rotating machinery.
Förderung
- National Key Research and Development Program of China
Zitieren
APA
Hu, W., Yang, Y., Zuo, S., Xia, H., Wu, X., & Pei, Z. (2025). Numerical investigation of Taylor–Couette flow in a grooved configuration. Physics of Fluids, 37(3). https://doi.org/10.1063/5.0257292
Vancouver
Hu W, Yang Y, Zuo S, Xia H, Wu X, Pei Z. Numerical investigation of Taylor–Couette flow in a grooved configuration. Physics of Fluids. 2025;37(3). doi:10.1063/5.0257292
BibTeX
@article{Hu2025,
author = {Hu, Wulong and Yang, Yi and Zuo, Siyuan and Xia, Haishan and Wu, Xinjiang and Pei, Zhiyong},
title = {Numerical investigation of Taylor–Couette flow in a grooved configuration},
journal = {Physics of Fluids},
year = {2025},
volume = {37},
number = {3},
doi = {10.1063/5.0257292}
}
EUVIMED