EUVIMEDEUVIMED entdecken
Crossref

Formic acid-engineered PEDOT:PSS for enhanced crystallinity and performance in tin–lead perovskite solar cells

Qinglong Jiang, Jiebin Wu, Cheng Chen, Zhenhuang Su, Yuanzhong Liu, Lin Yang, Bingchen He, Xingyu Gao, Fangliang Gao, Linfeng Lu

Applied Physics Letters · 01.03.2025 · 126 (10)

DOI: 10.1063/5.0254767 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Physics Letters, online erschienen am 13.03.2025. Verfasst von Qinglong Jiang und 9 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 52 Literaturangaben. Gefördert von: Shanxi Provincial Science and Technology Department, National Natural Science Foundation of China, the National Natural Science Foundation of Guangdong Province of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Organic–inorganic hybrid perovskite solar cells (PSCs) have shown tremendous promise due to their excellent optoelectronic properties and cost-efficient fabrication. However, the efficiency of traditional lead halide PSCs is approaching the Shockley–Queisser limit, prompting interest in tin-lead perovskite solar cells (Eg ≈ 1.25 eV) as a candidate for tandem configurations with the potential to surpass this limit. A key challenge lies in optimizing the hole transport layer (HTL), as widely used PEDOT:PSS suffers from high acidity and poor crystallinity, hindering device performance. In this work, we used a formic acid modification of PEDOT:PSS to enhance its conductivity, energy band alignment, and crystallinity. Acid treatment promotes proton transfer, reducing insulating PSS chains and improving phase separation, thereby facilitating efficient hole transport. Tin–lead perovskite films fabricated on formic acid-treated PEDOT:PSS (Fa-PEDOT:PSS) exhibit improved crystallinity, larger grain size, and reduced defect density. Devices incorporating Fa-PEDOT:PSS demonstrate enhanced photovoltaic performance, achieving a power conversion efficiency (PCE) of 21.87% with reduced hysteresis and excellent stability, retaining ∼90% of initial efficiency after 1600 h in an inert atmosphere. These findings highlight the potential of acid-treated PEDOT:PSS as an optimized HTL for tin–lead PSCs, paving the way for high-efficiency, environmentally friendly photovoltaic technologies.

Förderung

  • Shanxi Provincial Science and Technology Department
  • National Natural Science Foundation of China
  • the National Natural Science Foundation of Guangdong Province of China
  • the Characteristic Innovation Project of Universities in Guangdong Province
  • the Science and Technology Program of Guangzhou, China
  • Shanghai Science and Technology Development Funds

Zitieren

APA

Jiang, Q., Wu, J., Chen, C., Su, Z., Liu, Y., Yang, L., He, B., Gao, X., Gao, F., & Lu, L. (2025). Formic acid-engineered PEDOT:PSS for enhanced crystallinity and performance in tin–lead perovskite solar cells. Applied Physics Letters, 126(10). https://doi.org/10.1063/5.0254767

Vancouver

Jiang Q, Wu J, Chen C, Su Z, Liu Y, Yang L, et al. Formic acid-engineered PEDOT:PSS for enhanced crystallinity and performance in tin–lead perovskite solar cells. Applied Physics Letters. 2025;126(10). doi:10.1063/5.0254767

BibTeX
@article{Jiang2025,
  author = {Jiang, Qinglong and Wu, Jiebin and Chen, Cheng and Su, Zhenhuang and Liu, Yuanzhong and Yang, Lin and He, Bingchen and Gao, Xingyu and Gao, Fangliang and Lu, Linfeng},
  title = {Formic acid-engineered PEDOT:PSS for enhanced crystallinity and performance in tin–lead perovskite solar cells},
  journal = {Applied Physics Letters},
  year = {2025},
  volume = {126},
  number = {10},
  doi = {10.1063/5.0254767}
}
Kostenlos starten →