EUVIMEDEUVIMED entdecken
Crossref

Effect of particle shape on particle flow and heat transfer behavior based on computational fluid dynamics-discrete element modeling

Qiuqin Gou, Xinglin Wang, Guoding Chen, Surong Liu

Physics of Fluids · 01.02.2025 · 37 (2)

DOI: 10.1063/5.0254411 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Physics of Fluids, online erschienen am 07.02.2025. Verfasst von Qiuqin Gou und 3 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 56 Literaturangaben. Gefördert von: The open research subiect of the key laboratory of fluid and power machinery, The department of science and technology of Sichuan province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Particle fluidization technology is often involved in biomass industrial applications. However, the utilization of biomass particles requires gas–solid flow and processes, such as heat transfer and reaction transformation. Therefore, in this paper, biomass pellets were processed into cylindrical particles and designed with five aspect ratios (AR = 0.5, 1.0, 1.5, 2.0, and 3.0). The kinetic and heat transfer characteristics of cylindrical particles with different aspect ratios in a bubbling fluidized bed were analyzed from macroscopic and microscopic perspectives using the Computational Fluid Dynamics-Discrete Element Method. The simulation results show that the higher the sphericity of cylindrical particles (AR = 1), there is obvious particle aggregation near the wall, and the higher the bed height, the more asymmetric the particle flux distribution. Increasing the gas superficial velocity helps to improve the mixing quality of the particles, convective heat transfer, particle temperature cooling rate, and uniformity of particle temperature distribution. The contact force between particles is much larger than the gas–particle interaction force, and the particle contact force is mainly concentrated on both sides of the wall. The larger the aspect ratio of cylindrical particles, the smaller and more uniformly distributed the particle contact force at the wall. Furthermore, when AR > 1, the drag force and lift force gradually increase with the increase in particle aspect ratio, the faster the particle temperature decreases, the larger the particle convective heat transfer, and the larger the standard deviation of temperature.

Förderung

  • The open research subiect of the key laboratory of fluid and power machinery
  • The department of science and technology of Sichuan province

Zitieren

APA

Gou, Q., Wang, X., Chen, G., & Liu, S. (2025). Effect of particle shape on particle flow and heat transfer behavior based on computational fluid dynamics-discrete element modeling. Physics of Fluids, 37(2). https://doi.org/10.1063/5.0254411

Vancouver

Gou Q, Wang X, Chen G, Liu S. Effect of particle shape on particle flow and heat transfer behavior based on computational fluid dynamics-discrete element modeling. Physics of Fluids. 2025;37(2). doi:10.1063/5.0254411

BibTeX
@article{Gou2025,
  author = {Gou, Qiuqin and Wang, Xinglin and Chen, Guoding and Liu, Surong},
  title = {Effect of particle shape on particle flow and heat transfer behavior based on computational fluid dynamics-discrete element modeling},
  journal = {Physics of Fluids},
  year = {2025},
  volume = {37},
  number = {2},
  doi = {10.1063/5.0254411}
}
Kostenlos starten →