EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Magnetized liner inertial fusion platform development to assess performance scaling with drive parameters

M. R. Gomez, S. A. Slutz, C. A. Jennings, A. J. Harvey-Thompson, M. R. Weis, W. E. Lewis, B. T. Hutsel, D. C. Lamppa, M. Geissel, J. A. Crabtree, T. J. Awe, D. A. Yager-Elorriaga und 28 weitere

Physics of Plasmas · 01.03.2025 · 32 (3)

DOI: 10.1063/5.0253541 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Physics of Plasmas, online erschienen am 04.03.2025. Verfasst von M. R. Gomez und 39 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 115 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Sandia National Laboratories, National Nuclear Security Administration, Lawrence Livermore National Security, LLC under.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Magnetized liner inertial fusion (MagLIF) experiments have demonstrated fusion-relevant ion temperatures up to 3.1 keV and thermonuclear production of up to 1.1 × 1013 deuterium–deuterium neutrons. This performance was enabled through platform development that provided increases in applied magnetic field, coupled preheat energy, and drive current. Advanced coil designs with internal reinforcement enabled an increase from 10 to 20 T. An improved laser pulse shape, beam smoothing, and thinner laser entrance foils increased preheat energy coupling from less than 1 to 2.3 kJ. A redesign of the final transmission line and load region increased peak load current from 16 to 20 MA. The wider range of input parameters was leveraged to study target performance trends with preheat energy, applied magnetic field, and peak load current. Ion temperature and neutron yield generally followed trends in two-dimensional clean Lasnex calculations. Stagnation performance improved with peak load current when other input parameters were also increased such that convergence was maintained. This dataset suggests that reducing convergence to less than 30 would improve predictability of target performance. Lasnex was used to identify a simulation-optimized scaling path, which suggests 10+ kJ of fusion yield is possible on the Z facility with achievable input parameters. This path also indicates >10 MJ could be generated through volume burn on a future facility with a path to high yield (>200 MJ) using cryogenic dense fuel layers. The newly developed MagLIF platform enables exploration of both this simulation optimized scaling path and a recently developed similarity-scaling path.

Förderung

  • Sandia National Laboratories
  • National Nuclear Security Administration
  • Lawrence Livermore National Security, LLC under

Zitieren

APA

Gomez, M. R., Slutz, S. A., Jennings, C. A., Harvey-Thompson, A. J., Weis, M. R., Lewis, W. E., Hutsel, B. T., Lamppa, D. C., Geissel, M., Crabtree, J. A., Awe, T. J., Yager-Elorriaga, D. A., Ruiz, D. E., Aragon, C., Benavidez, K. A., Chandler, G. A., Cordaro, S. W., Fein, J. R., Field, E. S., …, & Shores, J. E. (2025). Magnetized liner inertial fusion platform development to assess performance scaling with drive parameters. Physics of Plasmas, 32(3). https://doi.org/10.1063/5.0253541

Vancouver

Gomez MR, Slutz SA, Jennings CA, Harvey-Thompson AJ, Weis MR, Lewis WE, et al. Magnetized liner inertial fusion platform development to assess performance scaling with drive parameters. Physics of Plasmas. 2025;32(3). doi:10.1063/5.0253541

BibTeX
@article{Gomez2025,
  author = {Gomez, M. R. and Slutz, S. A. and Jennings, C. A. and Harvey-Thompson, A. J. and Weis, M. R. and Lewis, W. E. and Hutsel, B. T. and Lamppa, D. C. and Geissel, M. and Crabtree, J. A. and Awe, T. J. and Yager-Elorriaga, D. A. and Ruiz, D. E. and Aragon, C. and Benavidez, K. A. and Chandler, G. A. and Cordaro, S. W. and Fein, J. R. and Field, E. S. and Hansen, S. B. and Knapp, P. F. and Jackson, J. and Kaye, R. J. and Lowinske, M. and Lucero, L. M. and Myers, C. E. and Mangan, M. A. and Mannion, O. M. and Norris, B. and Paguio, R. R. and Perea, L. and Porwitzky, A. J. and Rambo, P. K. and Robertson, G. K. and Rovang, D. C. and Sanchez, F. and Savage, M. E. and Schaeuble, M.-A. and Shipley, G. A. and Shores, J. E.},
  title = {Magnetized liner inertial fusion platform development to assess performance scaling with drive parameters},
  journal = {Physics of Plasmas},
  year = {2025},
  volume = {32},
  number = {3},
  doi = {10.1063/5.0253541}
}
Kostenlos starten →