kV-class vertical p-n heterojunction rectifier based on ITO/diamond
Applied Physics Letters · 27.01.2025 · 126 (4)
DOI: 10.1063/5.0245530 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Physics Letters, online erschienen am 27.01.2025. Verfasst von Hsiao-Hsuan Wan und 4 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 60 Literaturangaben. Gefördert von: Defense Threat Reduction Agency.
Abstract (Originalsprache)
Indium tin oxide (ITO) layers were sputter-deposited onto commercially available vertical p/p+ diamond structures consisting of 5 μm thick p-type (1.3 × 1016 cm−3) drift layers deposited by chemical vapor deposition on 250 μm thick heavily B-doped (3 × 1020 cm−3) single crystal substrates. The ITO is found to form a type II band alignment allowing Ohmic contact to the p-type diamond and creating a vertical n-p heterojunction. The maximum reverse breakdown of heterojunction rectifiers was ∼1.1 kV, with an on-resistance (RON) of 13 mΩ · cm2, leading to a power figure of merit of 99.3 MW/cm2. The on-voltage was 1.4 V, diode ideality factor was 1.22, with a reverse recovery time of 9.5 ns for 100 μm diameter rectifiers. The on/off ratios when switching from −5 V forward to 100 V reverse were in the range of 1011–1012. This is a simple approach for realizing high performance vertical diamond-based rectifiers for power switching applications.
Förderung
- Defense Threat Reduction Agency
Zitieren
APA
Wan, H., Chiang, C., Li, J., Ren, F., & Pearton, S. J. (2025). kV-class vertical p-n heterojunction rectifier based on ITO/diamond. Applied Physics Letters, 126(4). https://doi.org/10.1063/5.0245530
Vancouver
Wan H, Chiang C, Li J, Ren F, Pearton SJ. kV-class vertical p-n heterojunction rectifier based on ITO/diamond. Applied Physics Letters. 2025;126(4). doi:10.1063/5.0245530
BibTeX
@article{Wan2025,
author = {Wan, Hsiao-Hsuan and Chiang, Chao-Ching and Li, Jian-Sian and Ren, Fan and Pearton, Stephen J.},
title = {kV-class vertical p-n heterojunction rectifier based on ITO/diamond},
journal = {Applied Physics Letters},
year = {2025},
volume = {126},
number = {4},
doi = {10.1063/5.0245530}
}
EUVIMED