EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

In situ etching of β -Ga2O3 using tert -butyl chloride in an MOCVD system

Cameron A. Gorsak, Henry J. Bowman, Katie R. Gann, Joshua T. Buontempo, Kathleen T. Smith, Pushpanshu Tripathi, Jacob Steele, Debdeep Jena, Darrell G. Schlom, Huili Grace Xing, Michael O. Thompson, Hari P. Nair

Applied Physics Letters · 09.12.2024 · 125 (24)

DOI: 10.1063/5.0239152 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Physics Letters, online erschienen am 10.12.2024. Verfasst von Cameron A. Gorsak und 11 weiteren Autor:innen. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Air Force Office of Scientific Research, National Defense Science and Engineering Graduate, National Science Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, we investigate in situ etching of β-Ga2O3 in a metalorganic chemical vapor deposition system using tert-butyl chloride (TBCl). We report etching of both heteroepitaxial 2¯01-oriented and homoepitaxial (010)-oriented β-Ga2O3 films over a wide range of substrate temperatures, TBCl molar flows, and reactor pressures. We infer that the likely etchant is HCl (g), formed by the pyrolysis of TBCl in the hydrodynamic boundary layer above the substrate. The temperature dependence of the etch rate reveals two distinct regimes characterized by markedly different apparent activation energies. The extracted apparent activation energies suggest that at temperatures below ∼800 °C, the etch rate is likely limited by desorption of etch products. The relative etch rates of heteroepitaxial 2¯01 and homoepitaxial (010) β-Ga2O3 were observed to scale by the ratio of the surface energies, indicating an anisotropic etch. Relatively smooth post-etch surface morphology was achieved by tuning the etching parameters for (010) homoepitaxial films.

Förderung

  • Air Force Office of Scientific Research
  • National Defense Science and Engineering Graduate
  • National Science Foundation

Zitieren

APA

Gorsak, C. A., Bowman, H. J., Gann, K. R., Buontempo, J. T., Smith, K. T., Tripathi, P., Steele, J., Jena, D., Schlom, D. G., Xing, H. G., Thompson, M. O., & Nair, H. P. (2024). In situ etching of β -Ga2O3 using tert -butyl chloride in an MOCVD system. Applied Physics Letters, 125(24). https://doi.org/10.1063/5.0239152

Vancouver

Gorsak CA, Bowman HJ, Gann KR, Buontempo JT, Smith KT, Tripathi P, et al. In situ etching of β -Ga2O3 using tert -butyl chloride in an MOCVD system. Applied Physics Letters. 2024;125(24). doi:10.1063/5.0239152

BibTeX
@article{Gorsak2024,
  author = {Gorsak, Cameron A. and Bowman, Henry J. and Gann, Katie R. and Buontempo, Joshua T. and Smith, Kathleen T. and Tripathi, Pushpanshu and Steele, Jacob and Jena, Debdeep and Schlom, Darrell G. and Xing, Huili Grace and Thompson, Michael O. and Nair, Hari P.},
  title = {In situ etching of β -Ga2O3 using tert -butyl chloride in an MOCVD system},
  journal = {Applied Physics Letters},
  year = {2024},
  volume = {125},
  number = {24},
  doi = {10.1063/5.0239152}
}
Kostenlos starten →