EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Pipeline leak detection and localization based on the flow balance and negative pressure wave methods

Wei Li, Qing Fu, Hang Gao

AIP Advances · 01.11.2024 · 14 (11)

DOI: 10.1063/5.0235483 ↗

Kurz gefasst

Fachartikel in der Zeitschrift AIP Advances, online erschienen am 01.11.2024. Verfasst von Wei Li und 2 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 13 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The traditional water supply pipeline leak detection and location method has problems of false alarms, low positioning accuracy, and low stability. This paper focuses on the pipeline leak detection and location experimental platform to investigate water supply pipeline leaks, followed by simulation and experimental validation. This study integrates the mass flow balance method and pressure change inflection points to determine pipeline leaks and introduces an improved negative pressure wave method for locating leakage points. The results demonstrate that the system accurately detects pipeline leaks. The average positioning error of the improved negative pressure wave method for the leakage point is 4.76%, which has good stability and high positioning accuracy.

Zitieren

APA

Li, W., Fu, Q., & Gao, H. (2024). Pipeline leak detection and localization based on the flow balance and negative pressure wave methods. AIP Advances, 14(11). https://doi.org/10.1063/5.0235483

Vancouver

Li W, Fu Q, Gao H. Pipeline leak detection and localization based on the flow balance and negative pressure wave methods. AIP Advances. 2024;14(11). doi:10.1063/5.0235483

BibTeX
@article{Li2024,
  author = {Li, Wei and Fu, Qing and Gao, Hang},
  title = {Pipeline leak detection and localization based on the flow balance and negative pressure wave methods},
  journal = {AIP Advances},
  year = {2024},
  volume = {14},
  number = {11},
  doi = {10.1063/5.0235483}
}
Kostenlos starten →