An analytical heat transfer model for transient Raman thermometry analysis
Review of Scientific Instruments · 01.10.2024 · 95 (10)
DOI: 10.1063/5.0233790 ↗Kurz gefasst
Fachartikel in der Zeitschrift Review of Scientific Instruments, online erschienen am 29.10.2024. Verfasst von Taocheng Yu und 4 weiteren Autor:innen. Beteiligte Einrichtung: ZJU-UIUC Institute, College of Energy Engineering, Zhejiang University, Haining, Jiaxing, Zhejiang 314400, China. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 50 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Transient Raman thermometry improves on its steady-state counterpart by eliminating the error-prone steps of temperature calibration and laser absorption measurement. However, the accompanying complex heat transfer process often requires numerical analysis, such as the finite element method, to decipher the measured data. This step can be time-consuming, inconvenient, and difficult to derive a physical understanding of the heat transfer process involved. In this work, the finite element method is replaced by fitting the measured data to an analytical three-dimensional heat transfer model. This process can be completed in a few seconds. Using this approach, the in-plane thermal conductivity of two bulk layered materials and the interfacial thermal conductance between two-dimensional materials and quartz have been successfully measured. Based on our model, we performed an analytical quantitative sensitivity analysis for transient Raman thermometry to discover new physical insights. The sensitivity of the in-plane thermal conductivity of bulk layered materials is dictated by the ratio between the spot radius and heat spreading distance. The sensitivity of the interfacial thermal conductance between two-dimensional materials and quartz is determined by its conductance value. In addition, the uncertainty of the measured value contributed by the uncertainty of the input parameters can be efficiently estimated using our model. Our model provides an efficient data and sensitivity analysis method for the transient Raman thermometry technique to enable high throughput measurements, facilitate designing experiments, and derive physical interpretations of the heat transfer process.
Autor:innen und Institutionen
- ZJU-UIUC Institute, College of Energy Engineering, Zhejiang University, Haining, Jiaxing, Zhejiang 314400, China.
- State Key Laboratory of Silicon and Advanced Semiconductor Materials, School of Materials Science and Engineering, Zhejiang University, 310058 Hangzhou, China.
- State Key Laboratory of Clean Energy Utilization, Zhejiang University, Hangzhou, Zhejiang 310027, China.
ORCID-Profile: Taocheng Yu, Chenguang Fu, Tiejun Zhu, Wee-Liat Ong
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Yu, T., Fu, Y., Fu, C., Zhu, T., & Ong, W. L. (2024). An analytical heat transfer model for transient Raman thermometry analysis. Review of Scientific Instruments, 95(10). https://doi.org/10.1063/5.0233790
Vancouver
Yu T, Fu Y, Fu C, Zhu T, Ong WL. An analytical heat transfer model for transient Raman thermometry analysis. Review of Scientific Instruments. 2024;95(10). doi:10.1063/5.0233790
BibTeX
@article{Yu2024,
author = {Yu, Taocheng and Fu, Yilu and Fu, Chenguang and Zhu, Tiejun and Ong, Wee-Liat},
title = {An analytical heat transfer model for transient Raman thermometry analysis},
journal = {Review of Scientific Instruments},
year = {2024},
volume = {95},
number = {10},
doi = {10.1063/5.0233790}
}
EUVIMED